background image

 

 

 

EOS MINI / EOS MINI WIFI

 

 
The  Lumishore  Color  Change  system  takes  the  concept  of  marine  underwater  lighting  installations  to  new 
levels  of  brightness,  color  and  underwater  experience.  The  innovative  EOS  Mini  /  EOS  Mini  WiFi  allows  the 
boat owner to achieve unrivalled levels of color options and lighting modes over the full color spectrum. 
 
The  Color  Controller  allows  you  to  choose  and  easily  adjust  your  light  color,  and  by  scrolling  through  the 
various inbuilt lighting modes, you can select from a number of predefined colors, color cycle sequences. The 
Controller also incorporates fish attraction modes with variable strobe rates to enhance your fishing trip or sea 
life observation requirements. 
 
Color cycles and color sweeps bring dynamic moving light scenes to the boat. The EOS Mini WiFi controller has 
built in WiFi. This allows you to control your lights from your iPhone or iPad using the Lumishore App, which 
mimics the controller on you mobile device. 

For the ultimate party boat, The EOS Mini Controller has built in sound to light capabilities. The lights can be 
setup to synchronise their color change with the beat and frequency of your favourite music. 

Note: Refer to the relevant light installation instructions for how to install the lights onto your boat, and how 
to connect the system together.

  

 

 

PN: 45 – 0050 Rev 2 

Summary of Contents for EOS Mini














Reviews: