408
EPICenter Software Installation and User Guide
Voice over IP Manager
Refreshing the browser before a display update has completed may cause an exception
When you enable or disable a VoIP VLAN that has multiple devices, or when you configure VoIP Qos
settings on such a VLAN, it can take a long time (more than 30 seconds) to update the database and refresh
the display. In the browser-based client, if you attempt to do a browser refresh before this process has
finished, you may get an error exception. If this occurs, you will need to restart your browser. (1-7D7X1,
1-7D7XE, 1-7RTSM)
Saving VoIP configuration after VLAN changed outside VoIP applet results in incorrect
VoIP configuration display
If changes are made to a VoIP VLAN by another user (e.g. another EPICenter client or through the
ExtremeWare CLI) while you are configuring the VLAN through the VoIP applet, the EPICenter client
will be notified that something has changed, and will prompt you to save your configuration changes.
Before you save your changes you should ensure that the changes made to the VLAN do not conflict
with your configuration, or the configuration displayed through the VoIP applet may be inconsistent.
For example, if you place a port in the egress port list, and someone simultaneously removes that port
from the VLAN, if you save your configuration with that port still designated as an egress port, your
VoIP configuration will continue to show the removed port. Resyncing the switch through the Inventory
applet will update the VoIP configuration to correctly display only the existing ports. (1-7UFYI)
Egress port tables not updated when port configuration changes
If the EPICenter server is farther down in the queue on the switch, the VoIP applet may not receive the
trap that notifies it when the port configuration is changed, and the VoIP configuration will not be
updated. (PD2-65243630)
The MinQBuf value incorrect after VoIP configuration in ExtremeWare 6.1.7 b9
On a switch running 6.1.7 b9, after you configure Qos settings for a VoIP VLAN, the value shown for
the MinQBuf parameter, as displayed by the ExtremeWare
show qosprofile
command, is incorrect. It
will be displayed as a very large percentage where it should be zero. (1-5MKFT)
Summary of Contents for EPICenter 4.1
