manualshive.com logo in svg

Extreme Networks EPICenter 4.1, Software Installation Manual

Introducing Extreme Networks EPICenter 4.1, an innovative software solution empowering network administrators with advanced controls. Achieve seamless network management with our user-friendly interface. For a hassle-free experience, simply download the free EPICenter 4.1 Software Installation Manual from our website, allowing you to effortlessly maximize network efficiency and productivity.

Share
Download
background image

 

506

EPICenter Software Installation and User Guide

EPICenter Database Views

sysContact

string

The sysContact of the device.

read_write_community

string

The read/write SNMP community string.

read_only_community

string

The read-only SNMP community string.

cli_login

string

The CLI/Telnet login name of the device.

cli_password

string

The CLI/Telnet password for the above login.

status

string

The status of the device: “operational”, “marginal”, or “not responding”.

boot_time

string

The boot time of the device in GMT, e.g. “2000-11-13 21:05:28”.

hardware_id

string

The vendor specific hardware id of the device (not all device have a 
hardware id).

reserved

string

Reserved field, only used by a Cisco device to store Cisco specific 
information.

ip_forwarding

string

“true” if the device is a router, “false” otherwise.

current_software

string

The software version of the device.

The following columns are Extreme specific:

primary_image

string

The primary software image version on the device, e.g. “4.1.9 (2)”.

secondary_image

string

The secondary software image version on the device, e.g. “6.1.5b20”.

boot_rom

string

The version of the device’s boot rom, e.g. “7.2”.

image_after_reboot

string

The image to use after a switch reboot: “primary”, “secondary”, “neither”, 
or “unknown”.

board_number

string

The hardware board number.

other_numbers

string

Other hardware board numbers.

serial_numbers

string

The serial number of the device.

fan_status_string

string

The status of all fans on the device, e.g. “fan 1 OK; fan 2 OK; fan 3 
OK”.

selected_configuration

string

The currently selected configuration on the device: “primary” or 
“secondary”.

power_status_string

string

The status of the primary power supply of the device: “fan/temperature 
alarm”, “not present”, “OK”, “failed”, or “unknown”.

rps_status

string

The status of the redundant power supply of the device: 
“fan/temperature alarm”, “not present”, “OK”, “failed”, or “unknown”.

voltage

string

The voltage of the power supplied to the device: “110 AC”, “220 AC”, “48 
DC”, or “unknown”.

temperature

integer

The current operating temperature of the device in centigrade, e.g. 48.

default_gateway

string

The default gateway of the device, e.g. “10.205.0.1”.

Column Name

Column 
Type

Description

Summary of Contents for EPICenter 4.1



































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 4.1

Symantec 20032623 - Endpoint Protection Small Business Edition Implementation Manual preview
20032623 - Endpoint Protection Small Business Edition
Brand: Symantec Pages: 351
Netscape Certificate Management System 6.2 Administrator'S Manual preview
Certificate Management System 6.2
Brand: Netscape Pages: 874
Novation V-Station User Manual preview
V-Station
Brand: Novation Pages: 93
BT Voyager Digital Media Player Installation & User Manual preview
Voyager Digital Media Player
Brand: BT Pages: 30
GRASS VALLEY KAYAK HD-SD Datasheet preview
KAYAK HD-SD
Brand: GRASS VALLEY Pages: 8
GRASS VALLEY K2 FCP CONNECT - Release Note preview
K2 FCP CONNECT -
Brand: GRASS VALLEY Pages: 19
LEI Extras MapCreate Canada 6.3 Topo Addendum Manual preview
MapCreate Canada 6.3 Topo Addendum
Brand: LEI Extras Pages: 1
Spectra Logic Spectra nTier File Migrator User Manual preview
Spectra nTier File Migrator
Brand: Spectra Logic Pages: 92
National Instruments Instrument Driver NI-DMM Quick Reference preview
Instrument Driver NI-DMM
Brand: National Instruments Pages: 12
Olympus Studio 1.3 Instruction Manual preview
Studio 1.3
Brand: Olympus Pages: 14
Samsung PS63A756T1M Quick Manual preview
PS63A756T1M
Brand: Samsung Pages: 13
GameShark Media Manager for PSP Instruction Manual preview
Media Manager for PSP
Brand: GameShark Pages: 15
Lenovo ThinkCentre Edge 71z Hardware Maintenance Manual preview
ThinkCentre Edge 71z
Brand: Lenovo Pages: 182
Acer RDM User Manual Content preview
RDM
Brand: Acer Pages: 6
Canon Powershot S80 Software User'S Manual preview
Powershot S80
Brand: Canon Pages: 157
Genius G-Pen M712X User Manual preview
G-Pen M712X
Brand: Genius Pages: 11
Xerox 098S04703 Network Installation Manual preview
098S04703
Brand: Xerox Pages: 17
MACROMEDIA COLDFUSION 4.5 Use Manual preview
COLDFUSION 4.5
Brand: MACROMEDIA Pages: 236

Brands by name

Popular brands

Load more brands