manualshive.com logo in svg

Extreme Networks EPICenter 4.1, Software Installation Manual

Share
Download
Extreme Networks EPICenter 4.1 Software Installation Manual Download Page 173

 

Upgrading Software Images

EPICenter Software Installation and User Guide

173

#    on the server for each device type.

#  - Then uncomment the entry

#

#  DO NOT DELETE ANY OF THE LINES, COMMENT OUT IF UNUSED

#

#summit_inferno.boot.7.6 = ngboot76.bin

#summit_inferno.6.1.9 = v619b27.xtr

#summit_inferno.6.2.2 = v622b56.xtr

#summit_inferno.boot.7.8 = ngboot78.bin

#alpine_inferno.boot.7.6 = ngboot76.bin

#alpine_inferno.6.1.9 = v619b27.xtr

#alpine_inferno.6.2.2 = v622b56.xtr

#alpine_inferno.boot.7.8 = ngboot78.bin

#blackdiamond_inferno.boot.7.6 = ngboot76.bin

#blackdiamond_inferno.6.1.9 = v619b27.xtr

#blackdiamond_inferno.6.2.2 = v622b56.xtr

#blackdiamond_inferno.boot.7.8 = ngboot78.bin

By default, all values are commented out. You must uncomment each file that the switch will need in 
order to complete the multi-step upgrade.

Upgrading Images on Devices

To download a new ExtremeWare software image to an Extreme device, click the Upgrade button at the 
top of the window and select the Device tab. 

The Download Image on Device window appears, as shown in Figure 73.

Summary of Contents for EPICenter 4.1



































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands