manualshive.com logo in svg

Extreme Networks EPICenter 4.1, Software Installation Manual

Introducing Extreme Networks EPICenter 4.1, an innovative software solution empowering network administrators with advanced controls. Achieve seamless network management with our user-friendly interface. For a hassle-free experience, simply download the free EPICenter 4.1 Software Installation Manual from our website, allowing you to effortlessly maximize network efficiency and productivity.

Share
Download
background image

 

328

EPICenter Software Installation and User Guide

Using the VLAN Manager

Viewing Device Information from Pop-up Menus

From a device entry in the Component Tree (in either the By Switch or By VLAN view) you can select a 
VLAN or a device and right-click to display a pop-up menu. The contents of the pop-up menu depend 
on the component you have selected:

•

In the By VLAN view, select a VLAN and right-click to access the Modify VLAN Membership 
command.

•

In the By VLAN view, select a device and right-click to display a menu containing the Modify 
VLAN Membership, Alarms, Browse, EView, Statistics, Sync, Telnet, and Properties commands. 

•

In the By Switch view, select a device and right-click to display a menu containing the Alarms, 
Browse, EView, Statistics, Sync, Telnet, and Properties commands.

•

In the By Switch view, select a VLAN and right-click to access the Modify VLAN Membership 
command.

The Modify VLAN Membership command lets you modify the VLAN membership of the VLAN 
selected in the Component Tree. You cannot modify IP Forwarding behavior or search for device 
connections.The Properties command displays the attributes for a specific device group, device, slot, or 
port. The Alarms, Browse, EView, Statistics, Sync, and Telnet commands perform the same functions as 
the applets in the Navigation Toolbar to the left of the page, but with information displayed for the 
selected device. 

Modify VLAN Membership

The Modify VLAN Membership command lets you modify the VLAN membership of the VLAN 
selected in the Component Tree. You cannot modify IP Forwarding behavior or search for device 
connections. See “Modifying a VLAN from the Component Tree Menu” on page 337 for details on using 
this command. 

Alarms

The Alarms function runs the EPICenter Alarm System and displays the Alarm Browser function to 
show the alarms for the selected device. 

To view the Alarms display for a selected device:

•

Right-click on the device, then select Alarms from the pop-up menu that appears

This starts the Alarm System applet in a new window. The Alarm System displays the Alarm Log 
Browser and displays the alarms for the selected device.

See Chapter 5 for details on using this feature. 

Browse

The Device Browse function runs the ExtremeWare Vista switch management interface for the selected 
device. 

To run ExtremeWare Vista for a selected device:

•

Right-click on the device, then select Browse from the pop-up menu that appears

This starts the ExtremeWare Vista login page in a new window. 

Refer to the ExtremeWare Software User Guide for details on using ExtremeWare Vista. 

Summary of Contents for EPICenter 4.1



































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 4.1

Davis Instruments GroWeatherLink User Manual preview
GroWeatherLink
Brand: Davis Instruments Pages: 108
M-Audio GT Player Express Quick Start Manual preview
GT Player Express
Brand: M-Audio Pages: 4
Teklynx Form Designer User Manual preview
Form Designer
Brand: Teklynx Pages: 30
Nortel Contivity VPN Client User Manual preview
Contivity VPN Client
Brand: Nortel Pages: 90
KAPERSKY ANTI-VIRUS 5.1 - FOR MICROSOFT ISA SERVER Administrator'S Manual preview
ANTI-VIRUS 5.1 - FOR MICROSOFT ISA SERVER
Brand: KAPERSKY Pages: 67
Red Hat ENTERPRISE LINUX WS 2.1 - Installation Manual preview
ENTERPRISE LINUX WS 2.1 -
Brand: Red Hat Pages: 110
Mitsubishi Electric MELSOFT FR Configurator2 Instruction Manual preview
MELSOFT FR Configurator2
Brand: Mitsubishi Electric Pages: 230
Promise Technology PAM User Manual preview
PAM
Brand: Promise Technology Pages: 84
Dresser 5 Manual preview
5
Brand: Dresser Pages: 57
GRASS VALLEY EDIUS SP Datasheet preview
EDIUS SP
Brand: GRASS VALLEY Pages: 4
Ulead PYRO1394WebCam User Manual preview
PYRO1394WebCam
Brand: Ulead Pages: 24
KAPERSKY ANTI-VIRUS 5.5 - FOR LINUX-FREEBSD MAIL... Administrator'S Manual preview
ANTI-VIRUS 5.5 - FOR LINUX-FREEBSD MAIL...
Brand: KAPERSKY Pages: 93
Xerox FreeFlow Operator And Administrator Manual preview
FreeFlow
Brand: Xerox Pages: 308
Waves Digital Audio Effects Processor Doubler User Manual preview
Digital Audio Effects Processor Doubler
Brand: Waves Pages: 6
Canon VB-M40 Administrator'S Manual preview
VB-M40
Brand: Canon Pages: 104
Samsung PS63A756T1M Quick Manual preview
PS63A756T1M
Brand: Samsung Pages: 13
I.R.I.S. IRISSCAN 2 Getting Started Manual preview
IRISSCAN 2
Brand: I.R.I.S. Pages: 3
Lenovo THINKPAD T60 - Hardware Maintenance Manual preview
THINKPAD T60 -
Brand: Lenovo Pages: 210

Brands by name

Popular brands

Load more brands