Extreme Networks EPICenter 4.1, Software Installation Manual

Page: 487 / 546

The VlanMgr Utility
EPICenter Software Installation and User Guide 487
Assuming the default location for the TFTP root directory, and assuming that this command was
executed on July 24, 2001 at 10:02 AM, this will place the device configuration information in the file
epc4_1\user\tftp\configs\2001\07\24\10_20_30_40_1002.txt
.
• To download version 6.1.8 b11 of the ExtremeWare to an i-series device, enter the following
command:
TransferMgr -user admin -software v618b11.xtr -dip 10.20.30.40
The VlanMgr Utility
The VLAN Manager utility (VlanMgr) allows you to create and delete VLANs. These commands
configure the VLANs on the specified switches as well as adding the VLAN information to the
EPICenter database.
Using the VlanMgr Command
The VlanMgr utility is located in the EPICenter
bin
directory,
< EPICenter_install_dir >/bin
. By
default this is
epc4_1\bin
in Windows, or
/opt/extreme/epc4_1/bin
in a UNIX environment.
This command includes options for specifying EPICenter server access information, the operation to be
performed (create, modify or delete), the name of the VLAN, and the devices in the VLAN with their
configuration options.
The syntax of the command is as follows:
VlanMgr -user < EPICenter username > -create < VLAN name > -dip
< IP address > < other options > { -dip < IP address > < other options >} ...
VlanMgr -user < EPICenter username > -modify < VLAN name > -dip
< IP address > < other options > { -dip < IP address > < other options >} ...
VlanMgr -user < EPICenter username > -delete < VLAN name >
The EPICenter user name and one of the main options (
-create
,
-modify
, or
-delete
) are required.
The
-dip
option is required for a create or modify command. Other options are optional.
Table 19 specifies the options you can use with this command:
Table 19: VlanMgr command options
Option Value Default
-user <username> EPICenter user name. This option is required. None
-password <password> EPICenter user password. If the password is blank, do not include
this argument. No
password
-host <hostname | IP
address> EPICenter server hostname or IP address localhost
-port <port> EPICenter server port number 80
-help Displays syntax for this command None