manualshive.com logo in svg

Extreme Networks EPICenter 4.1, Software Installation Manual

Share
Download
Extreme Networks EPICenter 4.1 Software Installation Manual Download Page 343

 

Displaying STP Domain Information

EPICenter Software Installation and User Guide

343

Under the root node the Component Tree displays all the STP domains identified by the EPICenter 
server. The VLANs included in the domain are listed as subcomponents of the domain. The VLANs in 
turn show the devices with ports that are members of the VLAN within the domain. 

NOTE

Devices running earlier versions of ExtremeWare may also have Spanning Tree domains configured 
and enabled, but the EPICenter server is unable to obtain information about these domains because 
SNMP agent support for STP was added in version 6.2.2.

The information presented for each STP domain includes:

• Name

: The name of the STP domain.

• Tag

: The 802.1Q tag of one of the wholly-contained VLANs in the domain. 

• Root

: The device name, IP address, or MAC address of the device configured as the designated root 

of this STP domain. If STP is disabled for this domain, this field is blank. 

• Root Max Age

: The maximum allowable age for STP information learned by the root for this 

domain. If this age is reached, the current information is discarded and the Spanning Tree is 
recalculated. Value is in seconds.

• Root Hello Time

: The interval between transmission of Configuration BPDUs by the root for this 

domain. Value is in seconds.

• Root Forward Delay

: The forward delay time being used by the root for this domain. The forward 

delay is the time that a bridge remains in the learning and listening states, not forwarding data. 
Value is in seconds. 

• VLANs

: The number of VLANs participating in this domain.

• Devices

: The number of devices participating in this domain.

• Ports

: The total number of ports participating in this domain, if the domain is enabled.

NOTE

If an untagged STP domain spans multiple switches and is configured with different tags on different 
switches, it may appear as separate STP domains in EPICenter’s STP Monitor. 

Summary of Contents for EPICenter 4.1



































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands