Extreme Networks EPICenter 4.1, Software Installation Manual

Page: 471 / 546

The DevCLI Utility
EPICenter Software Installation and User Guide 471
These commands support a set of options for specifying device information such as passwords and
community strings, device group information such as device group names and member devices, as well
as information about the EPICenter server, such as host name or IP address, port, and user name and
password. You can also specify multiple IP addresses in a file to have them added or removed as a
group, as long as they all use the same user name, password, and community strings.
Table 13 specifies the options you can use with these commands:
Table 13: DevCli command options
Option Value Default
-a Device IP address. This option can be specified more than once. None
-b SNMP version 3 user name. initialmd5
-c Cisco enable password. “”
-d Device password. “”
-e Device group description. None
-f Input file name for IP addresses. This specifies an ascii file that contains a list of
IP addresses, one per line. No other information can be included in this file.
This option can be specified more than once.
None
-g Device group to which devices should be added. Case sensitive. The device group
must already exist. Default
-h Input file name for device groups. This specifies an ascii file that contains a list of
device group descriptions, one per line. A device group description may be
included by enclosing both the device group name and the device group in double
quotes. The quotes sever to delimit the two values.
This option can be specified more than once.
None
-i Device poll interval, in minutes 0
-j SNMP version 3 privacy password “”
-l (Letter l) User name to use for device login admin
-m New device group name. Use this command when you are modifying a device
group None
-n EPICenter server port number 80
-o SNMP version 3 authentication password initialmd5
-p EPICenter user password “”
-r Read community string (only needed for adding devices; not needed for deleting
them). public
-s EPICenter server hostname or IP address localhost
-t SNMP version 3 authentication protocol (none, MD5, SNA) md5
-u EPICenter user name none
-v SNMP version (1, 3)
-w Write community string (only needed for adding devices; not needed for deleting
them). “private”