manualshive.com logo in svg

Extreme Networks EPICenter 4.1, Software Installation Manual

Introducing Extreme Networks EPICenter 4.1, an innovative software solution empowering network administrators with advanced controls. Achieve seamless network management with our user-friendly interface. For a hassle-free experience, simply download the free EPICenter 4.1 Software Installation Manual from our website, allowing you to effortlessly maximize network efficiency and productivity.

Share
Download
background image

 

162

EPICenter Software Installation and User Guide

Configuration Manager

This starts the ExtremeView applet in a new window and displays the front-panel image and 
information for the selected device. 

See Chapter 10 for details on using this feature. 

Statistics

The Statistics function runs the EPICenter Real-Time Statistics applet and displays port statistics for the 
selected device. 

To view the Device Statistics display for a selected device:

•

Right-click on the device, then select Device from the pop-up menu that appears

This starts the Real-Time Statistics applet in a new window and displays port statistics for the selected 
device. 

See Chapter 11 for details on using this feature. 

Sync

Sync is a manual update of the regular data gathering mechanisms. Use Sync when you think that the 
device configuration or status is not correctly reported in EPICenter applets. Sync causes EPICenter to 
poll the switch and update all configuration and status information.

To launch the synchronization procedure for a selected device:

•

Right-click on the device, then select Sync from the pop-up menu that appears.

This starts the Sync procedure for the selected device.

See Chapter 4 for details on using this feature.

Telnet

The Telnet function opens an EPICenter telnet window that is connected to the selected device. 

To open a telnet session for a selected device:

•

Right-click on the device, then select Telnet from the pop-up menu that appears

This starts a telnet session for the device in a new window. 

See Chapter 7 for details on using this feature. 

VLANs

The VLANs function runs the EPICenter VLANs applet and displays the VLANs currently known to 
the EPICenter database.

To view the VLANs for a selected device: 

•

Right-click on the device, then select VLANs from the pop-up menu that appears

This starts the VLAN applet in a new window and displays the VLANs currently know to the 
EPICenter database.

Summary of Contents for EPICenter 4.1



































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 4.1

Canon PowerShot G10 - Digital Camera - Compact Software User'S Manual preview
PowerShot G10 - Digital Camera - Compact
Brand: Canon Pages: 49
AT&T OneVision DEFINITY G3 Fault Management and integration User Manual preview
OneVision DEFINITY G3 Fault Management and integration
Brand: AT&T Pages: 153
F-SECURE MOBILE SECURITY 6 FOR S60 - User Manual preview
MOBILE SECURITY 6 FOR S60 -
Brand: F-SECURE Pages: 37
National Instruments NI-DNET User Manual preview
NI-DNET
Brand: National Instruments Pages: 86
PNY S-Cure User Manual preview
S-Cure
Brand: PNY Pages: 15
VDO TIS-COMPACT III Brochure preview
TIS-COMPACT III
Brand: VDO Pages: 8
FujiFilm FINEPIX EX3.1 Quick Start Manual preview
FINEPIX EX3.1
Brand: FujiFilm Pages: 55
Elecard AVC HD Player 5.7 User Manual preview
AVC HD Player 5.7
Brand: Elecard Pages: 39
Bay Networks BayRS Notice preview
BayRS
Brand: Bay Networks Pages: 104
3xLogic Vigil Server V5.00 User Manual preview
Vigil Server V5.00
Brand: 3xLogic Pages: 134
Xerox 6100BD - Phaser Color Laser Printer User Manual preview
6100BD - Phaser Color Laser Printer
Brand: Xerox Pages: 56
Paradyne ACCULINK 7800-D1-999 Installation Manual preview
ACCULINK 7800-D1-999
Brand: Paradyne Pages: 11
Olympus CAMEDIA Master 4.3/Pro Operating Instructions Manual preview
CAMEDIA Master 4.3/Pro
Brand: Olympus Pages: 22
Alpine NVD-A211 SMART MAP PRO Owner'S Manual preview
NVD-A211 SMART MAP PRO
Brand: Alpine Pages: 95
Samsung G3 Station HX-DU010EC Specifications preview
G3 Station HX-DU010EC
Brand: Samsung Pages: 1
Samsung HX-MT010EA User Manual preview
HX-MT010EA
Brand: Samsung Pages: 25
Samsung ANYCAM SNC-35E User Manual preview
ANYCAM SNC-35E
Brand: Samsung Pages: 9
Samsung G2 PORTABLE HX-MU050DC (Korean) User Manual preview
G2 PORTABLE HX-MU050DC
Brand: Samsung Pages: 38

Brands by name

Popular brands

Load more brands