manualshive.com logo in svg

Extreme Networks EPICenter 4.1, Software Installation Manual

Introducing Extreme Networks EPICenter 4.1, an innovative software solution empowering network administrators with advanced controls. Achieve seamless network management with our user-friendly interface. For a hassle-free experience, simply download the free EPICenter 4.1 Software Installation Manual from our website, allowing you to effortlessly maximize network efficiency and productivity.

Share
Download
background image

EPICenter Software Installation and User Guide

267

 

11

Real-Time Statistics

This chapter describes how to use the Real-Time Statistics applet for:

•

Viewing percentage utilization or total errors data for multiple ports in an Extreme Networks switch, 
a switch slot, or a port group.

•

Viewing historical utilization, total errors, or individual errors data for a specific port on an Extreme 
Networks switch. 

Overview of Real-Time Statistics

The Real-Time Statistics feature of the EPICenter software enables you to view a graphical presentation 
of utilization and error statistics for Extreme Networks switches in real time. The data is taken from 
Management Information Base (MIB) objects in the etherHistory table of the Remote Monitoring 
(RMON) MIB. The Real-Time Statistics function is supported only for Extreme Networks switches.

NOTE

You must have RMON enabled on the switch in order to collect real-time statistics for the switch. 

You can view data for multiple ports on a device, device slot, or within a port group, and optionally 
limit the display to the “top N” ports (where N is a number you can configure). If you choose to view 
multiple ports, the display shows data for the most recent sampling interval for the selected set of ports. 
The display is updated every sampling interval. 

You can also view historical statistics for a single port. If you choose to view a single port, the display 
shows the value of the selected variable(s) over time, based on the number of datapoints the MIB 
maintains in the etherHistory table. 

You can choose from a variety of styles of charts and graphs as well as a tabular display. 

Summary of Contents for EPICenter 4.1



































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 4.1

Novell ZENworks 7.2 Linux Management Manual preview
ZENworks 7.2 Linux Management
Brand: Novell Pages: 10
Eaton Network Shutdown Module V3 User Manual preview
Network Shutdown Module V3
Brand: Eaton Pages: 65
Alcatel-Lucent Wireless Network Guardian 9900 Brochure preview
Wireless Network Guardian 9900
Brand: Alcatel-Lucent Pages: 2
Adobe FRAMEMAKER 6.0 Manual preview
FRAMEMAKER 6.0
Brand: Adobe Pages: 323
Blackberry WINDOWS LIVE MESSENGER - LEARN MORE User Manual preview
WINDOWS LIVE MESSENGER - LEARN MORE
Brand: Blackberry Pages: 18
Polycom Conference Composer User Manual preview
Conference Composer
Brand: Polycom Pages: 29
Adaptec CDP-00278-02-A User Manual preview
CDP-00278-02-A
Brand: Adaptec Pages: 133
GNOME 2.4 User Manual preview
2.4
Brand: GNOME Pages: 213
Oracle HTTP Server Administrator'S Manual preview
HTTP Server
Brand: Oracle Pages: 224
MACROMEDIA HOMESITE Using Manual preview
HOMESITE
Brand: MACROMEDIA Pages: 358
Lexicon PCM NATIVE DUAL DELAY Owner'S Manual preview
PCM NATIVE DUAL DELAY
Brand: Lexicon Pages: 36
Lexicon PCM NATIVE CHORUS Owner'S Manual preview
PCM NATIVE CHORUS
Brand: Lexicon Pages: 36
LXE 1280 Reference Manual preview
1280
Brand: LXE Pages: 260
PRESONUS MEGASTUDIO PRODUCER AUDIO SOFTWARE Datasheet preview
MEGASTUDIO PRODUCER AUDIO SOFTWARE
Brand: PRESONUS Pages: 3
Epson WorkForce Pro WP-4015 DN User Manual preview
WorkForce Pro WP-4015 DN
Brand: Epson Pages: 134
Waves GTR Solo User Manual preview
GTR Solo
Brand: Waves Pages: 29
Aastra 312 RELEASE NOTES Release Note preview
312 RELEASE NOTES
Brand: Aastra Pages: 8
Lenovo ThinkPad Z61M Install Manual preview
ThinkPad Z61M
Brand: Lenovo Pages: 2

Brands by name

Popular brands

Load more brands