![Extreme Networks EPICenter 4.1 Software Installation Manual Download Page 515](http://html1.mh-extra.com/html/extreme-networks/epicenter-4-1/epicenter-4-1_software-installation-manual_2454556515.webp)
RMON Rising Trap Events
EPICenter Software Installation and User Guide
515
RMON Rising Trap Events
This trap indicates that the value of the MIB variable being monitored has risen to or above the rising
threshold value. RMON rules need to be configured on a device for it to send out this trap. See
“Threshold Configuration” in Chapter 5 for more information.
RMON Falling Trap Events
This trap indicates that the value of the MIB variable being monitored has fallen to or below the falling
threshold value. RMON rules need to be configured on a device for it to send out this trap. See
“Threshold Configuration” in Chapter 5 for more information.
SLB Unit Added
Extreme Networks proprietary trap. This trap indicates that the server
load balancer has activated a group of virtual servers that it normally
would not activate. This may be due to the failure of another server
load balancer.
6.1 or later
SLB Unit Removed
Extreme Networks proprietary trap. This trap indicates that the server
load balancer has deactivated a group of virtual servers that it
normally has active. This indicates that something is wrong in the
server load balancer; for example, its ping check may be failing.
6.1 or later
STP New Root
Extreme Networks proprietary trap. This trap indicates that the
sending agent has become the new root of the Spanning Tree; the
trap is sent by a bridge soon after its election as the new root, e.g.,
upon expiration of the Topology Change Timer immediately
subsequent to its election.
6.2.2 or later
STP Topology Change
Extreme Networks proprietary trap. A topologyChange trap is sent by
a bridge when any of its configured ports transitions from the Learning
state to the Forwarding state, or from the Forwarding state to the
Blocking state. The trap is not sent if a newRoot trap is sent for the
same transition.
6.2.2 or later
Slot Change
Extreme Networks proprietary trap. This trap indicates that the value
of the extremeSlotModuleState for the specified extremeSlotNumber
has changed.
All
Smarttrap
Extreme Networks proprietary trap. This trap indicates that the value
of one of the object identifiers (or the value of an object below that in
the MIB tree) defined in the extremeSmartTrapRulesTable has
changed, and hence a new entry has been created in the
extremeSmartTrapInstanceTable. Such a trap is sent at most once
every thirty seconds if one or more entry was created in the last thirty
seconds.
All
Warm Start
Trap indicates that the device has been rebooted without power
recycling. An Extreme Networks switch never sends out this trap.
None
Table 25: SNMP Trap Events (continued)
Event
Definition
ExtremeWare
Version
Summary of Contents for EPICenter 4.1
