manualshive.com logo in svg

Extreme Networks EPICenter 4.1, Software Installation Manual

Introducing Extreme Networks EPICenter 4.1, an innovative software solution empowering network administrators with advanced controls. Achieve seamless network management with our user-friendly interface. For a hassle-free experience, simply download the free EPICenter 4.1 Software Installation Manual from our website, allowing you to effortlessly maximize network efficiency and productivity.

Share
Download
background image

 

440

EPICenter Software Installation and User Guide

The ACL Viewer

The display includes the following information:

• ! (exclamation point)

 is an empty column used to invoke a sort by policy precedence. Clicking the 

column header will sort the policies in precedence order. 

• Policy

 displays the name of the policy.

• Protocol

 indicates the protocol specified for the traffic (UPD, TCP, etc. in the example).

• Dest  IP

 is the destination IP address, derived from one of the host specifications.

• Dest L4 Port 

is the L4 port associated with the destination IP address, if a port has been specified. 

An asterisk indicates the specification “Any.” 

• Src IP

 is the source IP address, derived from one of the host specifications. 

• Src L4 Port 

is the L4 port associated with the source IP address, if a port has been specified. An 

asterisk indicates the specification “Any.” 

• Profile

 is the QoS profile that applies to this traffic flow.

• Status

 indicates whether the traffic pattern is unique or if it duplicates another traffic pattern.

If a rule is a duplicate, only one of the duplicate rules is used to configure the device. The rule used 
is based on the precedence of the duplicate rules.

To view the access list rules related to a specific device, select the device. If the device supports IP and 
Security policies (Extreme devices running 5.0x, 6.1 or later, or Cisco devices), the Access List page 
displays a comparison of the “ideal” access list rules (rules generated by the EPICenter Policy Manager 
based on your policy definitions) and the rules actually configured on the device, as shown in 
Figure 220.

Figure 220: AccessList display showing rules for an i-series device 

The View field at the top of the display lets you select how you want to view the device rules. You can 
view the Access List rules in three ways:

•

Select Compare policy and configured rules from the drop-down list to compare the 
EPICenter-generated rules with the rules configured on the device (as shown in Figure 220).

Summary of Contents for EPICenter 4.1



































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 4.1

NEC Versa 2730M Manual preview
Versa 2730M
Brand: NEC Pages: 4
Halcro RS232 Specification preview
RS232
Brand: Halcro Pages: 12
Lexmark Apps User Manual preview
Apps
Brand: Lexmark Pages: 3
Accordiva SecuExpress User Manual preview
SecuExpress
Brand: Accordiva Pages: 31
Patton electronics ForeSight 6100 Element Management System User Manual preview
ForeSight 6100 Element Management System
Brand: Patton electronics Pages: 70
Hitachi Universal Storage Platform VM Installation Planning Manual preview
Universal Storage Platform VM
Brand: Hitachi Pages: 62
Hitachi Universal Storage Platform V Reference Manual preview
Universal Storage Platform V
Brand: Hitachi Pages: 102
Hitachi MK-96RD626-07 User Manual preview
MK-96RD626-07
Brand: Hitachi Pages: 205
Campbell PC400 User Manual preview
PC400
Brand: Campbell Pages: 250
Yamaha DM2000 V2.1 Supplementary Manual preview
DM2000 V2.1
Brand: Yamaha Pages: 4
Yamaha ASIO DirectKS Owner'S Manual preview
ASIO DirectKS
Brand: Yamaha Pages: 6
Yamaha Audio Owner'S Manual preview
Audio
Brand: Yamaha Pages: 7
Yamaha Arp Owner'S Manual preview
Arp
Brand: Yamaha Pages: 9
Yamaha AE041 Owner'S Manual preview
AE041
Brand: Yamaha Pages: 11
Yamaha Card Filer Manual preview
Card Filer
Brand: Yamaha Pages: 15
Yamaha Add-On Effects Manual preview
Add-On Effects
Brand: Yamaha Pages: 14
Yamaha AN200 Editor Manual preview
AN200 Editor
Brand: Yamaha Pages: 72
Yamaha 03DVEK Owner'S Manual preview
03DVEK
Brand: Yamaha Pages: 129

Brands by name

Popular brands

Load more brands