manualshive.com logo in svg

Extreme Networks EPICenter 4.1, Software Installation Manual

Introducing Extreme Networks EPICenter 4.1, an innovative software solution empowering network administrators with advanced controls. Achieve seamless network management with our user-friendly interface. For a hassle-free experience, simply download the free EPICenter 4.1 Software Installation Manual from our website, allowing you to effortlessly maximize network efficiency and productivity.

Share
Download
background image

EPICenter Software Installation and User Guide

351

 

15

The ESRP Manager

This chapter describes how to use the EPICenter ESRP Manager applet for:

•

Viewing the status of ESRP-enabled VLANs and the ESRP-enabled switches in those VLANs

Overview of the ESRP Manager

The Extreme Standby Router Protocol (ESRP) is a feature of ExtremeWare that allows multiple switches 
to provide redundant layer 3 routing services, as well as layer 2 redundancy, to users. The ESRP 
Manager displays the status of ESRP-enabled VLANs and the ESRP-enabled switches in those VLANs. 
You can view a summary status for all the ESRP-enabled VLANs being monitored by EPICenter. You 
can also view detailed information for an individual ESRP-enabled VLAN and the switches in those 
VLANs.

NOTE

This chapter does not discuss ESRP functionality in any detail. For more information about ESRP, see 
the ExtremeWare Software User Guide, versions 6.0 or later. 

To start the ESRP Manager applet, click the ESRP button in the EPICenter Navigation Toolbar. The 
ESRP Manager applet appears, initially displaying a summary status of the ESRP-enabled VLANs 
known to EPICenter, as shown in Figure 176. 

Summary of Contents for EPICenter 4.1



































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 4.1

FARONICS POWER SAVE MAC Getting Started Manual preview
POWER SAVE MAC
Brand: FARONICS Pages: 5
FARONICS POWER SAVE Product Data Sheet preview
POWER SAVE
Brand: FARONICS Pages: 2
FARONICS DEEP FREEZE ENTERPRISE Getting Started Manual preview
DEEP FREEZE ENTERPRISE
Brand: FARONICS Pages: 3
FARONICS ANTI-EXECUTABLE ENTERPRISE Getting Started Manual preview
ANTI-EXECUTABLE ENTERPRISE
Brand: FARONICS Pages: 2
FARONICS DEVICE FILTER MAC Getting Started Manual preview
DEVICE FILTER MAC
Brand: FARONICS Pages: 4
F-SECURE CLIENT SECURITY 9.00 - QUICK Quick Installation Manual preview
CLIENT SECURITY 9.00 - QUICK
Brand: F-SECURE Pages: 32
Juniper SECURITY THREAT RESPONSE MANAGER - LOG MANAGEMENT INSTALLATION REV 1 Installation Manual preview
SECURITY THREAT RESPONSE MANAGER - LOG MANAGEMENT INSTALLATION REV 1
Brand: Juniper Pages: 30
Inalp Networks SmartWare R2.00 Software Configuration Manual preview
SmartWare R2.00
Brand: Inalp Networks Pages: 321
M-Audio GT Player Express Quick Start Manual preview
GT Player Express
Brand: M-Audio Pages: 4
Patton electronics SmartNode Series Software Configuration Manual preview
SmartNode Series
Brand: Patton electronics Pages: 655
Livescribe DESKTOP VERSION 1.2 User Manual preview
DESKTOP VERSION 1.2
Brand: Livescribe Pages: 70
eCopy ShareScan 4.2 Installation And Setup Manual preview
ShareScan 4.2
Brand: eCopy Pages: 266
Polycom Conference Composer User Manual preview
Conference Composer
Brand: Polycom Pages: 29
Silicon Image SataRaid User Manual preview
SataRaid
Brand: Silicon Image Pages: 36
UNIBLUE DriverScanner 2010 Product Manual preview
DriverScanner 2010
Brand: UNIBLUE Pages: 12
VMware VCLOUD REQUEST MANAGER Datasheet preview
VCLOUD REQUEST MANAGER
Brand: VMware Pages: 2
Xilinx LogiCORE Endpoint v2.4 User Manual preview
LogiCORE Endpoint v2.4
Brand: Xilinx Pages: 172
Quantum GoVault 40GB Software Manual preview
GoVault 40GB
Brand: Quantum Pages: 142

Brands by name

Popular brands

Load more brands