manualshive.com logo in svg

Extreme Networks EPICenter 4.1, Software Installation Manual

Share
Download
Extreme Networks EPICenter 4.1 Software Installation Manual Download Page 519

 

The Backup Utility

EPICenter Software Installation and User Guide

519

Syntax:

dbvalid [switches]

Database Connection Parameters

These are the parameters for the 

-c

 command-line switch. If the connection parameters are not 

specified, connection parameters from the SQLCONNECT environment variable are used, if set.

The connection parameters are separated by semicolons, and the entire set must be quoted. For 
example, under Windows, the following validates the EPICenter, connecting as user ID dba with 
password sql:

<

install_dir

>\database\dbvalid -c 

“uid=dba;pwd=sql;eng=EPIC41;dbf=<

install_dir

>\basecamp.db”

The Backup Utility

The Backup utility makes a backup copy of all data in the database, except for user names and 
passwords. Access the Backup utility from the MS DOS or Solaris command line using the 

dbbackup

 

command. This convention also allows incorporation into batch or command files. 

The DBBACKUP Command-line Utility

To back up the EPICenter database running under Windows, use the command:

<install_dir>

\database\dbbackup -c 

“uid=dba;pwd=sql;eng=EPIC41;dbf=

<install_dir

>\basecamp.db” 

<backup_dir>

Under Solaris, use the command:

<install_dir>

/database/dbbackup -c 

“uid=dba;pwd=sql;eng=EPIC41;dbf=

<install_dir>

/basecamp.db” 

<backup_dir>

This example assumes a database user ID of 

dba

, with password 

sql

. These are the defaults used when 

the database server is installed through the EPICenter installation process. If you have changed your 
database user ID and password, substitute your actual user ID and password in the command. 

Table 27: dbvalid Command Switches

Switch

Description

-c “keyword=value; ...”

Supply database connection 
parameters

Table 28: Database Connection Parameters for dbvalid Utility

uid=

<user name>

The user name used to login to the database. Default is dba. The user ID must 
have DBA authority.

pwd=

<password>

The password used to login to the database. Default is sql. 

dbf=<

database_file>

The name of the file that stores the data. This is the file to be validated. 

eng=EPIC41

The name of the database engine. This value must be EPIC41 for EPICenter 
4.1.

Summary of Contents for EPICenter 4.1



































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands