manualshive.com logo in svg

Extreme Networks EPICenter 4.1, Software Installation Manual

Introducing Extreme Networks EPICenter 4.1, an innovative software solution empowering network administrators with advanced controls. Achieve seamless network management with our user-friendly interface. For a hassle-free experience, simply download the free EPICenter 4.1 Software Installation Manual from our website, allowing you to effortlessly maximize network efficiency and productivity.

Share
Download
background image

 

348

EPICenter Software Installation and User Guide

The Spanning Tree Monitor

VLAN Properties

The VLAN Properties window displays the following information:

• Name

: The VLAN name

• Tag

: The VLAN tag value (if any) or “Untagged”

• Protocol

: The protocol filter configured for the VLAN

Click OK to close the window. 

The Device Pop-Up Menu

When you right-click on a device in the Component Tree, the pop-up menu contains Alarms, Browse, 
EView, Statistics, Sync, Telnet, VLANs, and Properties commands.

Alarms

The Alarms function runs the EPICenter Alarm System and displays the Alarm Browser function to 
show the alarms for the selected device. 

To view the Alarms display for a selected device:

•

Right-click on the device, then select Alarms from the pop-up menu that appears

This starts the Alarm System applet in a new window. The Alarm System displays the Alarm Log 
Browser and displays the alarms for the selected device.

See Chapter 5 for details on using this feature. 

Browse

The Device Browse function runs the ExtremeWare Vista switch management interface for the selected 
device. 

To run ExtremeWare Vista for a selected device:

•

Right-click on the device, then select Browse from the pop-up menu that appears

This starts the ExtremeWare Vista login page in a new window. 

Refer to the ExtremeWare Software User Guide for details on using ExtremeWare Vista. 

EView

The EView function runs the EPICenter ExtremeView applet and displays the device front-panel image 
and device information for the selected device. 

To view the EView for a selected device:

•

Right-click on the device, then select EView from the pop-up menu that appears

This starts the ExtremeView applet in a new window and displays the front-panel image and 
information for the selected device. 

See Chapter 10 for details on using this feature.

Summary of Contents for EPICenter 4.1



































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for EPICenter 4.1

Yamaha PM1D Manager V2 Owner'S Manual preview
PM1D Manager V2
Brand: Yamaha Pages: 24
MACROMEDIA COLDFUSION MX 61-CFML Quick Reference preview
COLDFUSION MX 61-CFML
Brand: MACROMEDIA Pages: 34
Extreme Networks ExtremeWare Enterprise Manager Installation And User Manual preview
ExtremeWare Enterprise Manager
Brand: Extreme Networks Pages: 264
Barco NioWatch Installation & User Manual preview
NioWatch
Brand: Barco Pages: 22
Arturia Analog Factory S.E. User Manual preview
Analog Factory S.E.
Brand: Arturia Pages: 31
VMware VCENTER CHARGEBACK 1.5 - API Manual preview
VCENTER CHARGEBACK 1.5 - API
Brand: VMware Pages: 150
Avaya C460 SMON Quick Start Manual preview
C460 SMON
Brand: Avaya Pages: 20
Allied Telesis 86222-27 Release Note preview
86222-27
Brand: Allied Telesis Pages: 46
Billion BiGuard C01 Quick Installation Manual preview
BiGuard C01
Brand: Billion Pages: 18
Ulead BURN.NOW 4 User Manual preview
BURN.NOW 4
Brand: Ulead Pages: 58
AVG ANTI-VIRUS 8.5 User Manual preview
ANTI-VIRUS 8.5
Brand: AVG Pages: 234
Sun Microsystems Solaris 7 User Manual preview
Solaris 7
Brand: Sun Microsystems Pages: 24
FieldServer FS-8700-47 Driver Manual preview
FS-8700-47
Brand: FieldServer Pages: 51
Darim VideoSpider User Manual preview
VideoSpider
Brand: Darim Pages: 8
Xerox -05W User Manual preview
-05W
Brand: Xerox Pages: 370
MACROMEDIA FLASH MX 2004 - ACTIONSCRIPT Reference Manual preview
FLASH MX 2004 - ACTIONSCRIPT
Brand: MACROMEDIA Pages: 816
Asus Security Protect Manager User Manual preview
Security Protect Manager
Brand: Asus Pages: 14
TC Electronic 24/7-C Manual preview
24/7-C
Brand: TC Electronic Pages: 6

Brands by name

Popular brands

Load more brands