Extreme Networks EPICenter 4.1, Software Installation Manual

Page: 107 / 546

Modifying Devices and Device Groups
EPICenter Software Installation and User Guide 107
SNMP V3 Privacy Protocol : Specifies the SNMP V3 privacy protocol. Select either No Privacy or
CBC DES Privacy.
SNMP V3 Privacy Password : If the device is using CBC DES Privacy, enter the privacy password.
SNMP V3 Authentication Protocol : Specifies the SNMP V3 authentication protocol. Select No
Authentication, MD5 Authentication, or SHA Authentication.
SNMP V3 Authentication Password : If the devices is using SNMP V3 Authentication, enter the
authentication password.
6 Click Modify to add the changed information to the EPICenter database.
7 Click Close to cancel the Modify process.
8 Click Reset to reset the values to their defaults.
Modifying a Device Group
Devices are always a member of a device group; devices not explicitly assigned to another device group
are members of the Default device group. This has two effects related to modifying device groups:
• When devices are removed from all other device groups, they are automatically added to the Default
device group.
• Devices cannot be removed from the Default device group using the Remove button in the Modify
dialog. To remove a device from the default device group, you must move it to another device
group.
You can begin the modify function using the Modify button on the toolbar, or by selecting a device
group in the Component Tree, right-clicking to display the pop-up menu, and selecting Modify Device
Group.
To add or remove devices in a device group, do the following:
1 Click the Modify button at the top of the Inventory Manager main page.
Select the appropriate tab to display the Modify Device Group window, as shown in Figure 35.