Extreme Networks EPICenter 4.1, Software Installation Manual

Page: 416 / 546

416 EPICenter Software Installation and User Guide
Using the Policy Manager
Creating a New Policy
To create a network policy, follow these steps:
1 Select New from the toolbar. This displays a new Policy Definition page, as shown in
Figure 203.
Figure 203: Policy description page for a new Access-based Security policy
2 Enter a name for the policy (required) and a description of the policy (optional).
3 If you do not want this policy to be configured onto any devices, click the Enabled check box once
to remove the check mark and indicate that this policy should not be enabled. The presence of a
check in the box indicates that the policy will be enabled, which is the default state.
4
Select a schedule for this policy, if desired. Default is 24 hours a day, 7 days a week. You can check
desired days, set start time on the 24 hour clock, and set time periods from 0 to 168 hours. Scheduled
times are allowed to overlap (see Figure 204).
Policy
endpoint
selection
Service
filter
specification
(IP and
traffic
Policy
domain
access
Flow
direction (IP
and Security
policies only)
Security)
selection