100/180 mm PAPERLESS GRAPHIC RECORDER: USER GUIDE
HA028910
Issue 13 Sep 16
User Guide
Page 271
Vertical Grid Total
Default
Number of vertical divisions for trend chart. If left at default uses
the value entered in Group Confi guration (
section 4.3.2
). Any
other setting overrides Group Confi guration entry
Vertical Minor Divs Default
Allows the user to enter a number of minor grid divisions. If left at
default, the value entered in Group Confi guration (
section 4.3.2
) is
used. Any other setting overrides Group Confi guration entry
Visible Alarm
Default
For ‘When Visible’ (below) is selected as ‘In alarm or error’ or ‘not
in alarm or error’. ‘Visible Alarm’ allows an alarm number to be
entered, for use in determining whether a component be visibile
or invisible.
Visible Channel
All points
For use ‘When Visible’ (below) is selected as ‘Channel Value’, ‘In
alarm or error’ or ‘not in alarm or error’. ‘Visible Channel’ allows
a point number to be selected from a pick list. See also Visible
Operator, and Visible Value, below.
Visible Operator
List of operators
For ‘When Visible’ (below) is selected as ‘Channel Value’. ‘Visible
Operator’ allows a comparison operator to be selected from a
picklist. The picklist contains the following items:
Greater than, Less than, Greater than or equal to, Less than or
equal to, Equal to, Not equal to. The comparison is made be-
tween the instantaneous value of the point selected in ‘Visible
Channel’ and the value entered in ‘Visible Value’ (below). For
example, when using the ‘Greater than’ operator, the component
is visible whenever the Visible Channel’s value is greater than the
Visible Value.
Visible Value
Default
For ‘When Visible’ (below) is selected as ‘Channel Value’. ‘Visible
Value’ allows a value to be entered to be used in the ‘Visible Op-
erator’ comparison described above.
When visible
Always
Component is always visible
Never
Component is never visible
Channel value
Component is visible or not, depending on the relationship
between the current value of a selected channel and a specifi ed
constant value. See ‘Visible channel’, above, for details.
In alarm or error
Component is visible if a specifi ed alarm on a specifi ed point is ac-
tive, or if the point is in an ‘Error’ state. See ‘Visible Alarm’, above,
for details.
Not in alarm or error Component is visible if a specifi ed alarm on a specifi ed point is
not active, or the point is not in an ‘Error’ state. See ‘Visible Alarm’,
above, for details.
7.3.2 ADVANCED PARAMETERS (Cont.)
Parameter
Pick list content
Description
Table 7.3.2 Advanced edit level parameters (sheet 6 of 6)
