100/180 mm PAPERLESS GRAPHIC RECORDER: USER GUIDE
User Guide
Page 233
HA028910
Issue 13 Sep 16
4.7.4 Message category
One or more messages (
section 4.3.8
) can be directed to the display, to ‘All groups’ or to a ‘Specifi ed
Group’. The messages must be contiguous - e.g. messages 2, 3 and 4 may be sent, but messages 1, 3
and 4 cannot be sent, without message 2 as well.
Figure 4.7.4 Message job menu layout
4.7.5 Maths category
If Maths channels (
section 4.3.11
) are enabled, the following jobs become available to applicable func-
tions:
Reset
Sets the selected maths channel value to zero.
Disable
Stops historical functions such as Fvalue, Stopwatch and Rolling Average from accu-
mulating further values. When the function is subsequently re-enabled, the function
re-starts from its pre-disabled value. ‘Disable’ has no effect on other functions.
Switch to B
Causes the relevant maths channel to copy source B instead of its normal source A -
see
section 4.3.11
for further details.
Trigger
Used to initiate a ‘Sample and hold’ function - see
section 4.3.11
for further details.
Figure 4.7.5 Maths job menu layout
Select 'Display', 'All Groups', or 'Specified Group'
Job Number
Send Message(s) to
Category
First Message
Last Message
Group
Select Required Group
(only if 'Specified Group' previously selected)
Select range of messages to be output.
On
Select 'Active', 'Inactive' or 'Acknowledgement'
1) Message 1
1
Message
Specified Group
1) Group 1
1) Message 1
Active
Job Number
Action
Category
Math
On
Math 1
1
Math
Reset
Active
Select 'Reset', 'Disable'
'Switch to B' or 'Trigger'
Select Required Maths channel
Select 'Active', 'Inactive',
or 'Acknowledgement'
