100/180 mm PAPERLESS GRAPHIC RECORDER: USER GUIDE
HA028910
Issue 13 Sep 16
User Guide
Page 240
4.7.16 Email category
Allows the user to send a specifi ed e-mail to the recipients set up in e-mail confi guration (see
section
4.3.19
). A system message is generated, and displayed in all recording groups whenever an e-mail is
sent.
4.7.17 Report category
Figure 4.7.17 Report category job menu
SEND REPORT TO
Allows the user to select ‘Group’ or an ASCII printer (if fi tted - requires Serial Comms. option) as the
report destination. If ‘Group’ is selected (as in the fi gure above), a further fi eld appears allowing the user
to specify the group to which the report is to be sent (Group 3 in the fi gure above). If a printer is selected,
the report is sent to the printer.
GROUP
This fi eld appears only if ‘Group’ has been selected as the report destination, and allows the destination
group to be defi ned. If a group descriptor has been entered (‘Furnace 3’ in the fi gure above), then this
descriptor appears in the fi eld.
REPORT
This defi nes which of the reports is to be sent when the job is triggered. If a Report descriptor has been
entered, then this appears in the fi eld (‘Current temps’ in the fi gure above).
Report
Group
3) Furnace 3
2) Current temps
Active
Category
Send Report to
Group
Report
On
Select 'Group' or printer (if fitted)
If destination = 'Group',
select destination group.
Select the report to be sent
Select 'Active', Inactive or
'Acknowledgement'.
