100/180 mm PAPERLESS GRAPHIC RECORDER: USER GUIDE
HA028910
Issue 13 Sep 16
User Guide
Page 104
4.3.10 BATCH RECORDING CONFIGURATION (Cont.)
OPERATOR INITIATION
If the TUS options is fi tted - see
section 15
.
This section describes how the operator initiates a new batch. Batches can be initiated from any of the
trend, bargraph or numeric display modes, but the start/stop and other messages appear only on the
Vertical Trend screen, in the trend history display and in Message Log. Batch information and status are
retained whilst power is off.
To initiate a batch, either
1, Operate the Option key, then press ‘Batch’ in the Option Menu* which appears, or
2. Touch the coloured message area at the top of the screen. The batch Status page appears - in this
example - with no batch running.
3. Press ‘New’. A new display page appears (fi gure 4.3.10b), showing all the headings entered in Field 1
to Field 6 during confi guration. If the Batch Fields entry is less than 6, then only the selected number
appear (in our example, 4).
*Notes:
1. The option menu is context sensitive, so its appearance may differ from the example shown.
2. Batches can also be started and stopped from the Batch Summary page as described in
sec-
tion 3.1.4
.
Group 1
Group
New
Close
No batch in progress
Status
'Group' data appears only if
Scope = Group (Section 1.2)
Option Menu
Batch
Enter History
Channel Cycling Off
Faceplates On/Off
Note
