100/180 mm PAPERLESS GRAPHIC RECORDER: USER GUIDE
HA028910
Issue 13 Sep 16
User Guide
Page 266
7.3.2 Advanced parameters
The selection of the Advanced properties set, is carried out from the Properties Options page as de-
scribed in
section 7.2.3
, above. Advanced properties are in addition to the basic properties described
above, not a replacement for them.
Parameter
Pick list content
Description
Table 7.3.2 Advanced edit level parameters (sheet 1 of 6)
3D effect
Enable/Disable
For Channel numeric display only, adds an embossed boxed sur-
round to the display. Applies only if ‘Custom’ selected as Face-
plate style.
Alarm marks colour None
Allows a colour to be selected for alarm marks on trend scales.
Default is colour 0 (red).
Bargraph style
Single Line...
For horizontal bargraphs only. ‘Plain’ produces a bargraph with
descriptor to the left of the bar, digital value to the right of the bar,
and alarm indication to the right of the decimal value. ‘With units’
adds units after the digital value. ‘3D’ adds an embossed boxed
surround. ‘Scale’ adds a scale below the bar, with end-point values
and tick points. Scale style (described below) may be used to
modify the appearance of the scale.
Faceplate below bar Produces coloured bar above channel descriptor, digital value and
alarm indication. No scale is printed
Just bar
Produces a colour bar with no textual information, or just the low
and high scale values, according to component.
Bar and scale
Produces a colour bar with a scale, but no digital value or alarm
indication
Default
Produces a colour bar with scale, with descriptor, digital value and
alarm indication above.
Default Vertical Bargraph Produces a colour bar with a scale
System Vertical Bargraph Produces a colour bar with a scale
Horizontal Bargraph Produces a colour bar with scale, with descriptor, digital value and
alarm indication above.
Best Fit Font
Enabled/Disabled
For Channel numeric only. Applies only if ‘Custom’ selected as
Faceplate style. If enabled, the display fonts for descriptor, value
and units are selected by the instrument to suit the screen scale.
The fonts will thus vary in size according to the size of the Chan-
nel Numeric display. Overridden by any settings for Value Font,
Descriptor Font or Units Font other than ‘Default’.
Channel cycle time 10
For group trend displays, allows a time period, in seconds, to be
entered for channel scroll rate. 0 = no scroll.
Colour Alarms
None
Used only when Colour style = ‘Channel alarms’. A semicolon-
separated list of (Colour channel) alarms, used to change the
colour of the component being confi gured according to alarm
status. Colours are defi ned in ‘Colour Backgrounds’ and ‘Colour
Foregrounds’, described below.
Colour Backgrounds None
Used only if Colour style = ‘Channel Alarms’ or ‘Channel thresh-
olds’. A semicolon-separated list of background colours for the
component being confi gured. The number of colours entered
must match the number of alarms or threshold values as appro-
priate. Overrides any entry in ‘Background Colour’. Colours are
entered by touching each required selection in turn. The semico-
lon separators are entered automatically, in front of each selection
(apart from the fi rst).
