100/180 mm PAPERLESS GRAPHIC RECORDER: USER GUIDE
HA028910
Issue 13 Sep 16
User Guide
Page 226
4.6.8 COPY (Cont.)
CONFIGURABLE PARAMETERS
Source Type
Picklist allows selection of Group, Channel, Event, Message, Maths Channel, Total-
iser, Counter, Timer, Output or Demand Write, as the type of source to be copied.
Copy From
Allows the user to select a specifi c point, group etc. to be copied
Copy To
Allows the fi rst destination point to be selected, for the source to be copied to.
–
Allows the fi nal destination point to be selected for the source to be copied to.
Include alarm data This fi eld appears only for source types which support alarms. If this box is ‘selected’,
then alarm data is included in the copy process.
Include job data
This fi eld appears only for source types which support jobs. If this box is ‘selected’,
then jobs data is included in the copy. For source types that support both alarms and
jobs, it is not possible to include job data, without including alarm data as well.
Once the copy is complete, the user should enter the confi guration area of the items that have been cop-
ied, and edit/apply the changes etc.
COPY RULES
1. The fi rst channel on any input card may not be a digital input type.
2. If a destination channel was a digital input, AND the source channel is an analogue input AND ‘in-
clude alarm data’ is not selected, the destination channel alarm settings will be set as:
Enable = Off; Type = Absolute high; Threshold = 0.0; Dwell = 0.0.
3. If a destination channel was an analogue input, AND the source channel is a digital input AND ‘in-
clude alarm data’ is not selected, the destination channel alarm settings will be set as:
Enable = Off; Type = Digital; Threshold = Closed; Dwell = 0.0.
4. Descriptors and Colours are never copied.
