100/180 mm PAPERLESS GRAPHIC RECORDER: USER GUIDE
User Guide
Page 227
HA028910
Issue 13 Sep 16
4.6.9 Job search
With multiple job sources, it can sometimes be diffi cult to discover what the trigger for a particular job is,
particularly if the recorder has been confi gured by more than one operator. The ‘Job Search’ facility al-
lows the user to defi ne a job type, and the recorder then produces a list of relevant triggers. Figure 4.6.9
shows a typical search page, which will produce a list of all triggers for Preset Totaliser jobs.
Figure 4.6.9a Job search
Section
Allows the user to select a point type for the search. For example, selecting ‘Maths’,
causes the search to be restricted to Maths channels. ‘All Sections’ causes all ena-
bled point types to be included in the search.
Job Category
Allows a job category (e.g. ‘Totaliser’) to be selected for the search.
Job Action
This depends on the job category. For example, for ‘Totalisers’, ‘Preset’, ‘Disable’,
Preset Group’ or ‘Disable Group’ to be selected. Section 4.7 gives details of all job
types and their associated actions.
Search Now
Operation of this button initiates the search, after confi rmation.
SEARCH RESULTS
The search results in one of two displays, one ‘No Match was found’ if no jobs are found which match the
search criteria, or a list of triggers is produced. A typical example is given in fi gure 4.6.9b.
Figure 4.6.9b Search results (typical)
Search Results
Channels (1), Alarm (1), Job (3)
Channels (3), Alarm (3), Job (1)
Channels (6), Alarm (4), Job (1)
Maths (1), Alarm (2), Job (3)
Ok
Search Now
All Sections
Totaliser
Preset
Section
Job Category
Job Action