100/180 mm PAPERLESS GRAPHIC RECORDER: USER GUIDE
HA028910
Issue 13 Sep 16
User Guide
Page 347
12.5 REPORT EXAMPLE
This example shows how to confi gure a report to be printed if any of channel 1 to channel 4 go into
alarm. It is assumed that the Serial comms link with the printer has been successfully established.
The report is to include the process values of channels 1 to 4 and the time and date.
Note: The example assumes that the channels being confi gured are in their factory default state.
Confi guration items not mentioned in the example (e.g. Scale Low) should be left at their default
values.
12.5.1 Group Confi guration
Refer to
section 4.3.2
, as necessary.
GROUP NUMBER 1
Descriptor = Colour mix.
Alarm message = Disable
Deselect all points except Channels 1 to 4.
12.5.2 Channel confi guration
Refer to
section 4.3.3
as necessary
CHANNEL 1
Input Type = Test
Scale High =100
Units = %
Descriptor = Red
Alarm 1
Enable = Unlatched
Type = Absolute low
Threshold = 10
CHANNEL 2
As channel 1, except
Descriptor = Blue
CHANNEL 3
As channel 1, except
Descriptor = Green
CHANNEL 4
As channel 1, except
Waveform = Sine 4 minutes
Descriptor = Orange
