100/180 mm PAPERLESS GRAPHIC RECORDER: USER GUIDE
User Guide
Page 235
HA028910
Issue 13 Sep 16
4.7.8 Timer category
The following jobs are available:
1. Reset timer - sets the timer to zero
2. Start timer - causes the timer to start.
3. Disable timer - stops the timer.
Figure 4.7.8 Timer job menu layout
4.7.9 Batch category
If the Batch option (
section 4.3.10
) is fi tted, a previously ‘Stored’ batch can be started by job action or by
a Batch Start command sent via MODBUS/TCP (
section 8
). If a batch is already running, it will be restart-
ed. In Batch confi guration, if Scope = Group, then a specifi c group can be selected for the batch job to
act on; if Scope = Instrument, the Group selection fi eld does not appear.
Figure 4.7.9 Batch job menu layout
Job Number
Action
Category
Timer
On
Timer 1
1
Timer
Reset
Active
Select 'Reset', 'Start' or 'Disable'
Select Required Timer
Select 'Active', 'Inactive' or 'Acknowledgement'
Job Number
Action
Category
Group
On
1) Group 1
1
Batch
Start
Active
Select 'Start' or 'Stop'
Select Required Group
(only if Scope = Group in Batch Configuration)
Select 'Active', 'Inactive'
or 'Acknowledgement'
