100/180 mm PAPERLESS GRAPHIC RECORDER: USER GUIDE
User Guide
Page 201
HA028910
Issue 13 Sep 16
4.4.1 ACCESS LEVELS (Cont.)
LOGIN DISABLED
For all levels except Logged Out, This allows any one or more of the access levels to be removed from the
‘Access when’ picklist.
Note: This feature should be used with discretion, or the situation might arise in which the record-
er cannot be logged onto, either at a particular access level or at all. It is recommended that at
least one user with Engineer-level access is retained with login enabled, or it may become neces-
sary to return the recorder to the manufacturer, or to arrange for a service visit.
Auditor option notes:
1. If the Auditor 21CFR11 option is fi tted, and the number of Password Retries is exceeded then
the relevant login is disabled. A user with Engineer level access can re-enable the login.
2. If the Auditor 21CFR11 option is fi tted, and the Password Expire time has been exceeded, all
logins are disabled. In order to reconfi gure the recorder, it is necessary to use the Service pass-
word - please contact the recorder supplier or the nearest service centre for advice.
EDIT OWN PASSWORD
Allows each user, with this permission enabled, to edit his/her password.
CHANGE ALARM SETPOINTS
Allows each user with this permission enabled, to edit alarm parameters under Confi guration/Channel
ACKNOWLEDGE ALARMS
Allows each user with this permission enabled to acknowledge alarms (
section 3.1.4
)
EDIT MATHS CONSTANT
For recorders fi tted with the Maths option only. If one or more maths channels are confi gured with func-
tion ‘Constant’, then with this permission set, the user may edit the constant value(s).
RESET MATHS
Allows the user to reset applicable maths functions. See
section 4.3.11
for further details of maths func-
tions.
PRESET TOTALISERS
Allows the user to preset totaliser values (if the option is fi tted). See
section 4.3.12
for further details of
totalisers.
PRESET COUNTERS
Allows the user to preset counter values (if the option is fi tted). See
section 4.3.13
for further details of
Counters.
START/RESET TIMERS
Allows the user to start and reset the timer value. See
section 4.3.14
for further details of timers.
SET CLOCK
Allows each user with this permission enabled, to set the recorder time and date functions under
System/
Clock
ADJUST I/O
Allows the user to adjust recorder inputs and outputs as described in
section 4.6.4
, and
section 9
below.