100/180 mm PAPERLESS GRAPHIC RECORDER: USER GUIDE
User Guide
Page 203
HA028910
Issue 13 Sep 16
4.4.1 ACCESS LEVELS (Cont.)
ACTION DEMAND WRITES
Appears only if the Master Comms option is fi tted. See
section 4.3.16
and
section 4.3.18
for further de-
tails.
When enabled, this allows a user with this login to write values manually over master comms either di-
rectly, by job action or (if the option is fi tted), by using the User Screens ‘Operator’ key. Where Demand
Writes are initiated by Job action, the job will be carried out whether or not this login has permission to
action Demand Writes.
Note:
When Audit trail is enabled, only the newly written value appears in the audit trail messages.
This is because the instrument has no way of determining what the value of the parameter was
before the write occurred.
The messages are of the form:
23/08/05 10:14:30 Auto Mode wrote 19.37
23/08/05 10:14:29 Demand write Auto Mode, Signed Engineer, No Auth. Reqd., Note
where ‘Auto Mode’ is the descriptor associated with the demand write, and ‘19.37’ is the value written.
FORCE CHANGE OF PASSWORD
When this checkbox is enabled for a user, it means that the user will have to change password at his/her
next login. At next log in, a pop-up dialogue box requests that a new password be entered. If a new
password is not entered, login is denied.
Entering the new password clears the checkbox, so this is a ‘one-shot’ operation, until the checkbox is
enabled again by a user with ‘Engineer’ level access.
Change Password
New Password
Retype Password
Apply
Logout
ENTER BATCH DATA
If ‘Batch Control’ is enabled, then this fi eld is automatically enabled, and is ‘greyed out’ so that it cannot
be edited.
If ‘Batch Control’ is not enabled, then enabling this item allows the user to enter batch data, but not to
start, stop or create new batches.
ALLOW WEB SERVER
Any user with this permission and ‘Connect from remote’ permission will be able to view the recorder
from a remote PC, using the
Remote user name and Remote password
described above.
Note: See
Annex C
for details of the Web server facility.
