Dionex As, Operator'S Manual

Page: 280 / 356

AS Autosampler Operator’s Manual
268
Doc. 065051-03 1/08
NOTE Press the down arrow to see additional parameters.
Figure C-34. Usage Log Screen (Additional Parameters)
Screen Field Description
MODULE ON The number of hours the AS has been powered-up.
BACKLIGHT The number of hours the backlight has been on.
INSERTS INJ
PORT The number of needle insertions into the inject port since the
counter was last reset to 0. Reset the counter after replacing the
sampling needle assembly and the needle seal assembly.
SAMP SYRINGE
USE The number of aspirate or dispense cycles the sample syringe
has performed since the counter was last reset to 0. Reset the
counter after replacing the syringe.
PREP SYRINGE
USE The number of aspirate or dispense cycles the prep syringe has
performed since the counter was last reset to 0. Reset the counter
after replacing the syringe.
XYZ NEEDLE
ASSEM The number of XYZ sampling needle arm movements
completed since the counter was last reset to 0. The count is
incremented when the needle arm moves to the home position,
to the vial, and to the inject port.
INJECT VALVE The number of times the injection valve has performed a
load/inject cycle since the counter was last reset to 0. Reset the
count after replacing the injection valve
DIVERTER VALVE The number of times the diverter valve has cycled the flow
between system 1 and system 2 since the counter was last reset
to 0.
RESET To reset a counter to 0, move the cursor to the corresponding
asterisk (*) field and press
Enter .
Help Prompt
USAGE LOG
MODULE ON:
BACKLIGHT:
INJECT VALVE:
DIVERTER VALVE:
XYZ NEEDLE ASSEM:
nnnnnn hours
nnnnnn hours
nnnnnn cycles
↑
nnnnnn cycles
nnnnnn cycles
RESET
*