Dionex As, Operator'S Manual

Page: 120 / 356

AS Autosampler Operator’s Manual
108
Doc. 065051-03 1/08
•
[367] The computed sample injection volume exceeded the vial
volume. The sample injection volume has been automatically
reduced. Please confirm injection volume parameter.
Actions: See Section 3.6.4 for the guidelines for sample volumes
used, loop sizes, and injection volumes. See Section 2.3.5 for a
list of the available sample vial and well plate sizes.
•
[368] The computed sample injection volume exceeded the syringe
volume. The sample injection volume has been automatically
reduced. Please confirm injection volume parameter.
Actions: See Section 3.6.4 for the guidelines for sample volumes
used, loop sizes, syringe sizes, and injection volumes.
•
[375] An attempt was made to use the sample prep syringe. This
option is not installed.
Two of the method sample prep operations (
DISPENSE
and
DILUTE
)
can be used only when the sample preparation option is installed. See
Section D.5.3 for details about defining sample prep steps from
the front panel.
Possible Causes: A
DISPENSE
or
DILUTE
operation was specified
in the sample prep steps of the current method, although the
sample preparation option is not installed.
Actions:
•
Remove the step(s) requiring the sample preparation option.
•
Select a method that does not require the sample preparation
option.
•
[376] Time-out occurred waiting for syringe to complete an action.
Every syringe action is assigned a maximum time in which the action
should be completed. The syringe did not complete its task in the
allotted time, indicating either a mechanical or a communication
problem.
Possible Causes:
•
Faulty syringe