Dionex As, Operator'S Manual

Page: 314 / 356

AS Autosampler Operator’s Manual
302
Doc. 065051-03 1/08
LINE
After you enter the
START
and
END
vial numbers, the
LINE
field displays
the appropriate schedule line numbers. You cannot edit the
LINE
field.
START
and
END
Enter the starting and ending vials for a range of vials to be sampled.
•
A range is a group of consecutively numbered vials that will be
sampled using the same schedule parameter values (injections per
vial, injection volume, and method number). The starting vial can be
a higher number than the ending vial.
•
For a single vial, enter the same number for
START
and
END
.
NOTE To sample from a well plate, the AS must be under
Chromeleon or Chromeleon Xpress control.
INJ/VIAL
Enter the number of injections (0 to 99) to perform on each vial.
•
If you enter 0, only the sample prep phase of the method is run.
•
If you enter multiple injections per vial, the sample prep phase of the
method is performed once only (before the first injection). The
method setup and timed events are performed for each injection.
INJ VOL
Enter the volume of sample to deliver for each injection. The range
allowed depends on the sampling mode and the size of the sample
syringe:
Tray Type Tray Capacity Valid Vial Numbers
1.5 mL, aluminum 100 vials (1.5 or 0.3 mL) 1 through 100
10 mL, plastic 49 PolyVials 1 through 49
Sampling Mode Sample Syringe
Size Inject Volume
Ranges Default
Normal Any 1.0– 1,000
μ
L 25.0
μ
L
Simultaneous 5 mL
10 mL 1,000–4,700
μ
L
1,000–8,000
μ
L
1,000
μ
L
1,000
μ
L
Concentrator 100–1,000
μ
L
5 mL
10 mL
100–1,000
μ
L
100–4,700
μ
L
100–8,000
μ
L
1,000
μ
L
4,000
μ
L
8,000
μ
L