DATREND Systems ES601-US, Operating Manual

Page: 217 / 244

ES601-US OPERATING MANUAL
Appendix A
#
Page 197
APPENDIX A. Safety AutoSequences
The following are the default Safety AutoSequences of ES601-US. ES601-US is supplied with these
AutoSequences pre-loaded in the flash memory. The default AutoSequences may be modified using the
ES601pc-US software, supplied on CDROM with ES601-US.
AutoSequences in the following list are identified as " SAFETY AUTOSEQUENCE #NN (SAFNN) ."
(SAFNN) refers to the command assigned by Datrend to the AutoSequence, to allow the AutoSequence to
be invoked from a Checklist (see
Automated Testing Principles , Chapter 6; and Checklist Editor ,
Chapter 8).
SAFETY AUTOSEQUENCE 1 (SAF01)
A1,A6: 10LD X,I
10-LEAD ECG TEST
Standard: AAMI-ES1
Limits Used: AAMI-ES1 Limits
Equipment Class: Class I
Line Voltage: Measure
Load Current: Measure
Insulation Resistance - Hot+Neutral to Ground: Skip
Insulation Resistance - Patient Leads to Ground: Skip
Ground Resistance: Measured At 1 Amp
Leakage Current: Measure
Equipment Power: On/Off
Polarity: Normal/Reverse
Neutral: Normal/Open
Ground: Normal/Open
Test External and Internal Case Leakages, plus:
Patient Leads
Lead to Lead Leakages
Patient Lead Groups
Group 1:
Name: ECG
Type: Isolated
Leads: 10
LD 1 - RA
LD 2 - RL