DATREND Systems ES601-US Operating Manual Download Page 100

Page: 100 / 244

ES601-US OPERATING MANUAL

Manual Testing/Chapter 5

Page 80

SCROLL BUTTONS:

Allows scrolling through the Records, either by single record (up

•

down

–

) or by page (10 records up or down )

ESCAPE:

Returns to the MAIN MENU of ES601-US.

COMPUTER INTERFACE:

Opens the COMPUTER INTERFACE menu to allow for communication
with the ES601pc-US software. (See Chapter 8).

SELECT RECORD:

Displays the contents of the highlighted Test Record. Within the Record
viewing menu, the various pages comprising a multi-page test result report
can be seen on the LCD. The report can be printed via the PRINTER
PORT or the RS-232 PORT.

Summary of Contents for ES601-US





















































































































































































































































Search results

Summary of Contents for ES601-US

Reviews:

Related manuals for ES601-US

Brands by name

Popular brands

DATREND Systems ES601-US, Operating Manual

Search results

Summary of Contents for ES601-US

Reviews:

Related manuals for ES601-US

Brands by name

Popular brands