DATREND Systems ES601-US, Operating Manual

Page: 179 / 244

ES601-US OPERATING MANUAL
ES601pc-US Software/Chapter 8
#
Page 159
Figure 111
After pressing "Connect", a message box with a transfer progress bar will appear ( Figure 109 ). After the
transfer is completed, a Transfer Complete message will appear and the message box will disappear .
8.6.25 Downloading AutoSequences
Sometimes it is desirable to bring data stored in the ES601-US back into your PC. This way, you can
transfer AutoSequence setups from one ES601-US analyzer to another.
You can retrieve AutoSequence setups from a ES601-US by pressing the "Download From ES601" button.
Choose to download via USB, Ethernet, or Serial Port. Doing so will overwrite the configuration of all 24
Safety AutoSequences in ES601pc-US with the sequences from the ES601-US.
These sequences can then be uploaded to a different ES601-US, or they can be optionally modified and
uploaded to the same ES601-US unit, or additional ES601-US units.
8.6.26 Printing AutoSequences
Press the Print button to show the print dialogue. Select the current sequence radio button and press OK to
print out the current AutoSequence. Select the All Sequences radio button and press OK to print out all 24
AutoSequences. Pressing Cancel will close the print dialogue without printing.
8.6.27 Return to Main Menu
When edits have been completed, the user may return to the main menu of ES601pc-US by pressing this
button. When this button is pressed, all changes which have been made will be saved on your computer.
If the configuration that existed when entering the Editor may be required at
a later time, be sure to
Backup the configuration before making any edits.