DATREND Systems ES601-US, Operating Manual

Page: 184 / 244

ES601-US OPERATING MANUAL
ES601pc-US Software/Chapter 8
#
Page 164
Figure 115
8.8.1 Editing the AutoSequence Title
The AutoSequence title can be modified by first selecting the sequence in the ECG Sequence dropdown
menu. Press the "Edit Autosequence Title" button and a window will appear prompting you to enter a new
autosequence title (
Figure 113
). The two lines can hold up to 18 characters each.
8.8.2 Adding a Waveform
To add a step to a sequence, select a waveform from the Simulator Waveforms pane (on left side of the
screen). Select the desired relative scale by clicking on the "Relative Scale" radio buttons. The options are
x1, x2, or x0.5 scale, corresponding to 1 mV, 2 mV or 0.5 mV QRS amplitude on ECG Lead II. Press the
"Add" button. The waveform will appear in the Waveform Sequence pane on the right side of the screen.
Optionally, you can select a waveform from the Simulator Waveforms pane, and drag and drop the
waveform to the Waveform Sequence pane. The waveform will appear in the Waveform Sequence window
at the end of the sequence.
8.8.3 Removing a Waveform
Select a waveform in the Waveform Sequence pane (on the right side of the screen) and press the "Remove"
button. The waveform will be removed from the sequence.
8.8.4 Modifying the Order of Waveforms in a Sequence
Select a waveform in the Waveform Sequence pane (on the right) and press one of the green arrow buttons
under the window. The double arrow up will move the waveform to the first step of the sequence. The
single arrow up will move the waveform one step up in the sequence. The single arrow down will move the
waveform one step down in the sequence. The double arrow down will move the waveform to the last step
of the sequence.