DATREND Systems ES601-US, Operating Manual

Page: 43 / 244

ES601-US OPERATING MANUAL
Setup/Chapter 3
#
Page 23
RS-232 PORT:
Opens the connection via the RS-232 Port and awaits
communication from the PC running ES601pc-US.
USB PORT:
Opens the connection via the USB Port and awaits
communication from the PC running ES601pc-US.
ETHERNET
PORT:
Opens the connection via the ETHERNET Port and
awaits communication from the PC running ES601pc-US.
BACK:
Exit Computer Interface mode to the System Settings
menu.
CAL TOUCHSCN:
Enters a utility for calibrating the touch screen of ES601-US. Note: If the user
chooses to perform the calibration procedure, the calibration must be
completed as directed by the instructions presented on the LCD, otherwise, an
unuseable touch screen may result (see Chapter 9).
PRE-TEST
INSPECTION:
Determines whether or not a physical inspection of the equipment is requested
at the start of an automated test (autosequence or checklist). If enabled, the user
will be asked to enter up to two lines of comments to describe the inspection
that was performed and the results.
POST-TEST
COMMENT:
Determines whether or not the user will be prompted to enter comments at the
end of an automated test (autosequence or checklist).
PROMPT FOR
USER TIME:
Determines whether or not the user will be prompted to enter a "user time" at
the end of an automated test (autosequence or checklist). The user time is the
time taken to complete an assigned work task, and is a data entry required by
some computerized maintenance management systems (CMMS).
MAIN MENU:
Return to the MAIN MENU. On exit, changes made to settings are saved in
the non-volatile memory of ES601-US.
MORE SETTINGS:
Displays System Settings Menu #2. Refer to the following section.