DATREND Systems ES601-US, Operating Manual

Page: 52 / 244

ES601-US OPERATING MANUAL
Setup/Chapter 3
#
Page 32
Figure 11
- AutoSequence selector menu.
3.6 Safety AutoSequence Editor
ES601-US can be programmed to automatically perform the measurements which comprise a complete test
of electrical safety. In an automated test or "
AutoSequence ", the measurements are performed in a continuous
sequence, one after the other. According to the user's programming, the sequence can be optionally broken
at specific steps to allow operation of the DUT or changes in electrical connections. AutoSequences can
save a significant amount of time when testing complicated equipment with multiple patient leads, such as
patient monitors.
ES601-US provides memory for storage of 24 user-programmable Safety AutoSequences. These sequences
can be programmed by means of the Safety AutoSequence module of the ES601pc-US software package
included with ES601-US (see Chapter 8). Alternatively, the sequences can be programmed using the
operator interface of ES601-US as described in this section. Note that figures appearing in this section
illustrate example settings only; the specific appearance of menus on your ES601-US will depend on how
your instrument may have been programmed previously.
The AutoSequence programmer is entered from System Settings Menu #1, via the EDIT SAFETY button
(see Section 3.2). A menu will then be displayed allowing the user to select an AutoSequence for editing:
On the selector menu, use PREV PAGE and NEXT PAGE buttons to view the four menu screens
provided. When the desired AutoSequence appears on the screen, press the button to the left of the title to
view the editor main menu: