DATREND Systems ES601-US, Operating Manual

Page: 117 / 244

ES601-US OPERATING MANUAL
Automated Testing/Chapter 6
#
Page 97
Figure 62
- Prompt for test comments.
After equipment inspection, the actual test begins in which various measurements of electrical safety or
device performance will be executed automatically by ES601-US, in accordance with the test chosen. Note
that if you wish to have power applied during Autosequences or Checklists (other than Electrical Safety,
ECG or Test Device Autosequences) power must be applied or removed through the use of the TRPN or
GTOL commands (see 6.1.5.7 The M Checkitem). After all test measurements have been completed,
according to System Settings the user may be optionally prompted to input concluding comments about the
test performed. As with the prompt for physical inspection, this data entry can be skipped by pressing the
SKIP button.
Entry of test comments may be optionally followed by a prompt to input "user time", that is, the labor time
(in hours) spent by the user in performing the assigned work task. As with other requests for data input
from the user, entry of a user time may be skipped via a
SKIP
button on the screen.