View whether the logging buffer is full (see
parameter group 15-1* Data Log Settings
). The logging buffer is never full when
parame-
ter 15-13 Logging Mode
is set to
[0] Log always
.
Option
Name
Description
[0]*
No
[1]
Yes
Parameter 16-41 Performance Maintenance
Table 610: Parameter 16-41 Performance Maintenance
16-41 Performance Maintenance
Default Value: 0
Parameter Type: Range, 0 - 2147483647
Setup: All set-ups
Conversion Index: 0
Data Type: VisStr[50]
Change during operation: True
Parameter 16-42 Service Log Counter
Table 611: Parameter 16-42 Service Log Counter
16-42 Service Log Counter
Default Value: 0
Parameter Type: Range, 0 - 2147483647
Setup: All set-ups
Conversion Index: 0
Data Type: Uint8
Change during operation: True
Shows the number of service logs stored in the ServiceLog file. If the ServiceLog file is full, clear the logged data by selecting option
[5] Clear
service logs in
parameter 14-22 Operation Mode
. The logged data is deleted on the next power-up.
Parameter 16-43 Timed Actions Status
Table 612: Parameter 16-43 Timed Actions Status
16-43 Timed Actions Status
Default Value: [0] Timed actions auto
Parameter Type: Option
Setup: All set-ups
Conversion Index: -
Data Type: Uint8
Change during operation: True
Select the times actions view.
Option
Name
Description
[0]*
Timed actions auto
[1]
Timed actions disabled
[2]
Constant on action
[3]
Constant off actions
Parameter 16-45 Motor Phase U Current
Table 613: Parameter 16-45 Motor Phase U Current
16-45 Motor Phase U Current
Default Value: 0 A
Parameter Type: Range, 0 - 10000 A
Setup: All set-ups
Conversion Index: -2
Data Type: Int32
Change during operation: True
Shows the motor phase U
RMS
current. Facilitates monitoring of imbalance in the motor currents, detection of weak motor cables or
imbalance in motor windings.
AU373327181955en-000101 / 130R1208
308 | Danfoss A/S © 2021.08
Parameter Descriptions
VLT® AutomationDrive EZ FC 321
Programming Guide
