N O T I C E
When
parameter 1-10 Motor Construction
is set to
[1] PM non-salient SPM
, only selection
[0] Digital input
is available.
Option Name
Description
[0]
Digital input Activate a start command via a digital input.
[1]
Bus
Activate a start command via a serial communication port or fieldbus option.
[2]
Logic AND
Activate a start command via the fieldbus/serial communication port and also via 1 of the digital inputs.
[3]
Logic OR
Activate a start command via the fieldbus/serial communication port or via 1 of the digital inputs.
Parameter 8-53 Start Select
Table 441: Parameter 8-53 Start Select
8-53 Start Select
Default value: [3] Logic OR
Parameter type: Option
Setup: All setups
Conversion index: –
Data type: Uint8
Change during operation: True
Select the trigger for the start function.
Option
Name
Description
[0]
Digital input
A digital input triggers the start function.
[1]
Bus
A serial communication port or the fieldbus triggers the start function.
[2]
Logic AND
The fieldbus/serial communication port and a digital input trigger the start function.
[3]*
Logic OR
The fieldbus/serial communication port or a digital input triggers the start function.
Parameter 8-54 Reversing Select
Table 442: Parameter 8-54 Reversing Select
8-54 Reversing Select
Default value: Size related
Parameter type: Option
Setup: All setups
Conversion index: –
Data type: Uint8
Change during operation: True
Select the trigger for the reversing function.
Option
Name
Description
[0]
Digital input
A digital input triggers the reversing function.
[1]
Bus
A serial communication port or the fieldbus triggers the reversing function.
[2]
Logic AND
The fieldbus/serial communication port and a digital input trigger the reversing function.
[3]
Logic OR
The fieldbus/serial communication port or a digital input triggers the reversing function.
AU373327181955en-000101 / 130R1208 | 225
Danfoss A/S © 2021.08
Parameter Descriptions
VLT® AutomationDrive EZ FC 321
Programming Guide
