Parameter 15-05 Over Volt's
Table 526: Parameter 15-05 Over Volt's
15-05 Over Volt's
Default Value: 0
Parameter Type: Range, 0 - 65535
Setup: All set-ups
Conversion Index: 0
Data Type: Uint16
Change during operation: False
View the number of drive overvoltages.
Parameter 15-06 Reset kWh Counter
Table 527: Parameter 15-06 Reset kWh Counter
15-06 Reset kWh Counter
Default Value: [0] Do not reset
Parameter Type: Option
Setup: All set-ups
Conversion Index: -
Data Type: Uint8
Change during operation: True
Option
Name
Description
[0]*
Do not reset
No reset of the kWh counter is required.
[1]
Reset counter
Press [OK] to reset the kWh counter to 0 (see
parameter 15-02 kWh Counter
).
Parameter 15-07 Reset Running Hours Counter
Table 528: Parameter 15-07 Reset Running Hours Counter
15-07 Reset Running Hours Counter
Default Value: [0] Do not reset
Parameter Type: Option
Setup: All set-ups
Conversion Index: -
Data Type: Uint8
Change during operation: True
Option Name
Description
[0]*
Do not reset
[1]
Reset counter To reset the running hours counter to 0, select
[1] Reset
and press [OK] (see
parameter 15-01 Running
Hours
). This parameter cannot be selected via the serial port, RS485. Select
[0] Do not reset
if no reset of
the running-hours counter is required.
4.15.2 15-1* Data Log Settings
The data log enables continuous logging of up to 4 data sources (
parameter 15-10 Logging Source
) at individual rates (
parameter
15-11 Logging Interval
). A trigger event (
parameter 15-12 Trigger Event
) and window (
parameter 15-14 Samples Before Trigger
) are used
to start and stop the logging conditionally.
Parameter 15-10 Logging Source
Table 529: Parameter 15-10 Logging Source
15-10 Logging Source
Default Value: [0] None
Parameter Type: Option, Array [4]
Setup: 2 set-ups
Conversion Index: -
Data Type: Uint16
Change during operation: True
Select the variables to be logged.
AU373327181955en-000101 / 130R1208 | 285
Danfoss A/S © 2021.08
Parameter Descriptions
VLT® AutomationDrive EZ FC 321
Programming Guide
