10.399 (ID 879) Fieldbus Process Data In 4 Selection
Location in the menu:
P2.9.22
(Multi-purpose Control Application)
Use this parameter to select a parameter or monitoring value to be controlled from the fieldbus.
To control an item, enter the ID number of the item as the value of this parameter.
See
10.400 (ID 880) Fieldbus Process Data In 5 Selection
Location in the menu:
P2.9.23
(Multi-purpose Control Application)
Use this parameter to select a parameter or monitoring value to be controlled from the fieldbus.
To control an item, enter the ID number of the item as the value of this parameter.
See
10.401 (ID 881) Fieldbus Process Data In 6 Selection
Location in the menu:
P2.9.24
(Multi-purpose Control Application)
Use this parameter to select a parameter or monitoring value to be controlled from the fieldbus.
To control an item, enter the ID number of the item as the value of this parameter.
See
10.402 (ID 882) Fieldbus Process Data In 7 Selection
Location in the menu:
P2.9.25
(Multi-purpose Control Application)
Use this parameter to select a parameter or monitoring value to be controlled from the fieldbus.
To control an item, enter the ID number of the item as the value of this parameter.
See
10.403 (ID 883) Fieldbus Process Data In 8 Selection
Location in the menu:
P2.9.26
(Multi-purpose Control Application)
Use this parameter to select a parameter or monitoring value to be controlled from the fieldbus.
To control an item, enter the ID number of the item as the value of this parameter.
See
10.404 (ID 896) Fieldbus State Machine
Location in the menu:
P2.9.35
(Multi-purpose Control Application)
Use this parameter to select the control profile (state machine) for the fieldbus control.
If ProfiDrive mode is selected, the fieldbus option board has to be set to bypass mode. See
10.632 Fieldbus Control in Detail
for
further information.
Selection
number
Selection
name
Description
0
Standard
This mode makes the fieldbus control behave as explained in the used fieldbus option board
manual.
1
ProfiDrive
This mode uses ProfiDrive state machine in application software.
This mode is possible to use only with the fieldbus boards that do not have their own state ma-
chine or have the possibility to bypass state machine functionality in the option board.
10.405 (ID 1001) Number of Auxiliary Drives
Location in the menu:
P2.9.1
(Pump and Fan Control Application)
Use this parameter to set the total number of auxiliary drives.
The functions controlling the auxiliary drives (parameters
ID 458
to
ID 462
) can be programmed to relay outputs or digital output. By
default, one auxiliary drive is in use and it is programmed to relay output RO1 at B.1.
AB296635287482en-000301 / DPD00903 | 267
Danfoss A/S © 2023.02
Parameter Descriptions
VACON® NX All-in-One
Application Guide
Summary of Contents for VACON NX
Page 1: ...Application Guide VACON NX All in One drives danfoss com...
Page 2: ......
