Danfoss VACON NX, Application Manual

Page: 310 / 360

Table 122: Current Scaling in Different Size of Units
Voltage (V AC) Size Scale
208–240 NX_2 0001–0011 100 – 0.01 A
208–240 NX_2 0012–0420 10 – 0.1 A
380–500 NX_5 0003–0007 100 – 0.01 A
380–500 NX_5 0009–0300 10 – 0.1 A
380–500 NX_5 0385 – 1–1 A
525–690 NX_6 0004–0013 100 – 0.01 A
525–690 NX_6 0018 – 10 – 0.1 A
10.624.3 Process Data in (Master -> Slave)
ControlWord, Reference, and Process Data are used in All in One applications as follows:
Table 123: Basic, Standard, Local/Remote, Multi-Step Applications
Data Value Unit Scale
Reference Speed reference % 0.01%
ControlWord
Start/Stop command
Fault reset command
- -
PD1 – PD8 Not used - -
The settings in Table 124 are factory defaults. See also parameter group G2.9 .
Table 124: Multi-Purpose Control Application
Data Value Unit Scale
Reference Speed reference % 0.01%
ControlWord
Start/Stop command
Fault reset command
- -
Process Data IN1 Torque reference % 0.01%
Process Data IN2 Free analog input % 0.01%
Process Data IN3 Adjust input % 0.01%
PD4 – PD8 Not used - -
Table 125: PID Control and Pump and Fan Control Applications
Data Value Unit Scale
Reference Speed reference % 0.01%
ControlWord
Start/Stop command
Fault reset command
- -
Process Data IN1 Reference for PID controller % 0.01%
AB296635287482en-000301 / DPD00903 310 | Danfoss A/S © 2023.02
Parameter Descriptions
VACON® NX All-in-One
Application Guide