Danfoss VACON NX, Application Manual

Page: 90 / 360

Bit
False True
b13 No limit controls active Limit control active
b14 External brake control OFF External brake control ON
b15
-
Heartbeat
Application Status Word combines different drive statuses to one data word (see Monitoring Value V1.21.4 Status Word). Status
Word is visible on keypad in Multi-Purpose application only. The Status Word of any other application can be read with the VACON
®
NCDrive PC software.
Table 54: Application Status Word Content
Status
Word Standard Ap-
plication Local/Remote
Control Appli-
cation Multi-Step
Control Appli-
cation PID Control Ap-
plication Multi-Purpose Con-
trol Application Pump and Fan
Control Appli-
cation
b0
- - - - Flux Ready -
b1 Ready Ready Ready Ready Ready Ready
b2 Run Run Run Run Run Run
b3 Fault Fault Fault Fault Fault Fault
b4
- - - - At Reference -
b5
- - -
No EMStop (VA-
CON
®
NXP)
- -
b6 Run Enable Run Enable Run Enable Run Enable Run Enable Run Enable
b7 Warning Warning Warning Warning Warning Warning
b8
- - - - At Zero Speed -
b9
- - - - Start Delay -
b10
- - - - Torque Control
Speed Limit Active -
b11 DC Brake DC Brake DC Brake DC Brake DC Brake DC Brake
b12 Run request Run request Run request Run request Run request Run request
b13 Limit control Limit control Limit control Limit control Limit control Limit control
b14
- - - -
Brake control Aux 1
b15
-
Place B is active
-
PID active
-
Aux 2
AB296635287482en-000301 / DPD00903 90 | Danfoss A/S © 2023.02
Multi-purpose Control Application
VACON® NX All-in-One
Application Guide