Danfoss VACON NX, Application Manual

Page: 14 / 360

Index Parameter Min Max Unit Default ID Description
P2.9 Nominal current of the motor 0.1 x I
H
2 X I
H
A I
H
113 -
P2.10 Motor cos phi 0.30 1.00
-
0.85 120 -
P2.11 Start function 0 2
-
0 505 0 = Ramp
1 = Flying start
2 = Conditional flying start
P2.12 Stop function 0 3
-
0 506 0 = Coasting
1 = Ramp
2 = Ramp + Run enable coast Ramp
3 = Coast + Run enable ramp
P2.13 U/f optimization 0 1
-
0 109 0 = Not used
1 = Automatic torque boost
P2.14 I/O reference 0 3
-
0 117 0 = AI1
1 = AI2
2 = Keypad
3 = Fieldbus
P2.15 Analog input 2, reference off-
set 0 1
-
1 302 0 = 0–20 mA
1 = 4–20 mA
P2.16 Analog output function 0 8
-
1 307 0 = Not used
1 = Output freq. (0- f
max
)
2 = Freq. reference (0-f
max
)
3 = Motor speed (0-Motor nominal speed)
4 = Output current (0-InMotor)
5 = Motor torque (0-TnMotor)
6 = Motor power (0-PnMotor)
7 = Motor voltage (0-UnMotor)
8 = DC-link volt (0-1000V)
P2.17 DIN 3 function 0 7
-
1 301 0 = Not used
1 = Ext. fault, closing cont.
2 = Ext. fault, opening cont.
3 = Run enable, cc
4 = Run enable, oc
5 = Force cp. to I/O
6 = Force cp. to keypad
7 = Force cp. to fieldbus
P2.18 Preset speed 1 0.00 P2.2 Hz 0.00 105 -
P2.19 Preset speed 2 0.00 P2.2 Hz 50.00 106 -
P2.20 Automatic restart 0 1
-
0 731 0 = Disabled
2 = Enabled
AB296635287482en-000301 / DPD00903 14 | Danfoss A/S © 2023.02
Basic Application
VACON® NX All-in-One
Application Guide