Danfoss VACON NX, Application Manual

Page: 73 / 360

Index Parameter Min Max Unit Default ID Description
P2.6.8
Output voltage at zero frequency 0.00 40.00 % Varies 606
-
P2.6.9 Switching frequency 1.0 Varies kHz Varies 601
-
P2.6.10
Overvoltage controller
0 2
-
1 607 0 = Not used
1 = Used (no ramping)
2 = Used (ramping)
P2.6.11 Undervoltage controller 0 2
-
1 608 0 = Not used
1 = Used
2 = Used (ramping to zero)
P2.6.12 Load drooping 0.00 100.00 % 0.00 620
-
P2.6.13 Identification 0 2/5
-
0 631 0 = No action
1 = Identification w/o run
2 = Identification with run
VACON
®
NXP only:
3 = Encoder ID run
4 = No action
5 = ID Run Failed
Closed Loop parameter group 2.6.14
P2.6.14.1 Magnetizing current 0.00 2 x I
H
A 0.00 612
-
P2.6.14.2 Speed control P gain 1 1000
-
30 613
-
P2.6.14.3 Speed control I time 0.0 3200.0 ms 30.0 614
-
P2.6.14.5 Acceleration compensation 0.00 300.00 % 0.00 626
-
P2.6.14.6 Slip adjust 0 500 % 100 619
-
P2.6.14.7 Magnetizing current at start 0.00 I
L
A 0.00 627
-
P2.6.14.8 Magnetizing time at start 0 60000 ms 0 628
-
P2.6.14.9 0-speed time at start 0 32000 ms 100 615
-
P2.6.14.10 0-speed time at stop 0 32000 ms 100 616
-
P2.6.14.11 Start-up torque 0 3 0 621 0 = Not used
1 = Torque memory
2 = Torque reference
3 = Start-up torque fwd/rev
P2.6.14.12 Start-up torque FWD -300.0 300.0 % 0.0 633
-
P2.6.14.13 Start-up torque REV -300.0 300.0 % 0.0 634
-
P2.6.14.15 Encoder filter time 0.0 100 ms 0.0 618
-
AB296635287482en-000301 / DPD00903 | 73 Danfoss A/S © 2023.02
PID Control Application
VACON® NX All-in-One
Application Guide