ID
Monitoring value
ID
Monitoring value
7
DC-link voltage
28
AI4
8
Unit temperature
31
AO1 (expander board)
9
Motor temperature
32
AO2 (expander board)
13
AI1
37
Active fault 1
14
AI2
45
Motor current (drive independent) given with one decimal point.
See also
7.4.1 Monitoring Values (Control Panel: Menu M1)
10.387 (ID 853) Fieldbus Process Data Out 2 Selection
Location in the menu:
P2.9.4
(Multi-purpose Control Application)
Use this parameter to select the data that is sent to the fieldbus with the ID number of the parameter or monitor value.
To monitor an item, enter the ID number of the item as the value of this parameter.
See
10.386 (ID 852) Fieldbus Process Data Out 1 Selection
.
10.388 (ID 854) Fieldbus Process Data Out 3 Selection
Location in the menu:
P2.9.5
(Multi-purpose Control Application)
Use this parameter to select the data that is sent to the fieldbus with the ID number of the parameter or monitor value.
To monitor an item, enter the ID number of the item as the value of this parameter.
See
10.386 (ID 852) Fieldbus Process Data Out 1 Selection
.
10.389 (ID 855) Fieldbus Process Data Out 4 Selection
Location in the menu:
P2.9.6
(Multi-purpose Control Application)
Use this parameter to select the data that is sent to the fieldbus with the ID number of the parameter or monitor value.
To monitor an item, enter the ID number of the item as the value of this parameter.
See
10.386 (ID 852) Fieldbus Process Data Out 1 Selection
.
10.390 (ID 856) Fieldbus Process Data Out 5 Selection
Location in the menu:
P2.9.7
(Multi-purpose Control Application)
Use this parameter to select the data that is sent to the fieldbus with the ID number of the parameter or monitor value.
To monitor an item, enter the ID number of the item as the value of this parameter.
See
10.386 (ID 852) Fieldbus Process Data Out 1 Selection
.
10.391 (ID 857) Fieldbus Process Data Out 6 Selection
Location in the menu:
P2.9.8
(Multi-purpose Control Application)
Use this parameter to select the data that is sent to the fieldbus with the ID number of the parameter or monitor value.
To monitor an item, enter the ID number of the item as the value of this parameter.
See
10.386 (ID 852) Fieldbus Process Data Out 1 Selection
.
10.392 (ID 858) Fieldbus Process Data Out 7 Selection
Location in the menu:
P2.9.9
(Multi-purpose Control Application)
Use this parameter to select the data that is sent to the fieldbus with the ID number of the parameter or monitor value.
To monitor an item, enter the ID number of the item as the value of this parameter.
Location in the menu:
P2.9.4
(Multi-purpose Control Application)
10.393 (ID 859) Fieldbus Process Data Out 8 Selection
Location in the menu:
P2.9.10
(Multi-purpose Control Application)
Use this parameter to select the data that is sent to the fieldbus with the ID number of the parameter or monitor value.
To monitor an item, enter the ID number of the item as the value of this parameter.
AB296635287482en-000301 / DPD00903 | 265
Danfoss A/S © 2023.02
Parameter Descriptions
VACON® NX All-in-One
Application Guide
Summary of Contents for VACON NX
Page 1: ...Application Guide VACON NX All in One drives danfoss com...
Page 2: ......
