Danfoss VACON NX, Application Manual

Page: 137 / 360

Index Parameter Min Max Unit Default ID Description
P2.2.2.4
AI1 custom minimum setting -160.00 160.00 % 0.00 321
-
P2.2.2.5 AI1 custom maximum setting -160.00 160.00 % 100.00 322
-
P2.2.2.6 AI1 signal inversion 0 1
-
0 323 0 = Not inverted
1 = Inverted
1
Use the Terminal to Function method (TTF) with these parameters, see 10.626 "Terminal to Function" (TTF) Programming Principle )
2 Remember to place jumpers of block X2 according to the selection (0, 1 or 2). See the User Manual of the product.
Table 94: Analog Input 2 (Control Panel: Menu M2 -> G2.2.3)
Index Parameter Min Max Unit Default ID Description
P2.2.3.1
(1)
AI2 signal selection 0.1 E.10
-
A.2 388
-
P2.2.3.2
AI2 filter time 0.00 10.00 s 0.10 329 0 = No filtering
P2.2.3.3
(2)
AI2 signal range 0 2
-
1 325 0 = 0–10 V (0–20 mA)
1 = 2–10 V (4–20 mA)
2 = Customised
P2.2.3.4
AI2 custom minimum setting -160.00 160.00 % 0.00 326
-
P2.2.3.5 AI2 custom maximum setting -160.00 160.00 % 100.00 327
-
P2.2.3.6 AI2 inversion 0 1
-
0 328 0 = Not inverted
1 = Inverted
1
Use the Terminal to Function method (TTF) with these parameters, see 10.626 "Terminal to Function" (TTF) Programming Principle )
2
Remember to place jumpers of block X2 according to the selection (0, 1, or 2). See the User Manual of the product.
Table 95: Analog Input 3 (Control Panel: Menu M2 -> G2.2.4)
Index Parameter Min Max Unit Default ID Description
P2.2.4.1
(1)
AI3 signal selection 0.1 E.10
-
0.1 141
-
P2.2.4.2
AI3 filter time 0.00 10.00 s 0.10 142 0 = No filtering
P2.2.4.3
(2)
AI3 signal range 0 2
-
1 143 0 = 0–10 V (0–20 mA)
1 = 2–10 V (4–20 mA)
2 = Customised
P2.2.4.4
AI3 custom minimum setting -160.00 160.00 % 0.00 144
-
P2.2.4.5 AI3 custom maximum setting -160.00 160.00 % 100.00 145
-
P2.2.4.6 AI3 signal inversion 0 1
-
0 151 0 = Not inverted
AB296635287482en-000301 / DPD00903 | 137 Danfoss A/S © 2023.02
Pump and Fan Control Application
VACON® NX All-in-One
Application Guide