Danfoss VACON NX, Application Manual

Page: 138 / 360

Index Parameter Min Max Unit Default ID Description
1 = Inverted
1
Use the Terminal to Function method (TTF) with these parameters, see 10.626 "Terminal to Function" (TTF) Programming Principle )
2
Remember to place jumpers of block X2 according to the selection (0, 1, 2 or 3). See the User Manual of the product.
Table 96: Analog Input 4 (Control Panel: Menu M2 -> G2.2.5)
Index Parameter Min Max Unit Default ID Description
P2.2.5.1
(1)
AI4 signal selection 0.1 E.10
-
0.1 152
-
P2.2.5.2
AI4 filter time 0.00 10.00 s 0.00 153 0 = No filtering
P2.2.5.3
(2)
AI4 signal range 0 2
-
1 154 0 = 0–10 V (0–20 mA)
1 = 2–10 V (4–20 mA)
2 = Customised
P2.2.5.4
AI4 custom minimum setting -160.00 160.00 % 0.00 155
-
P2.2.5.5 AI4 custom maximum setting -160.00 160.00 % 100.00 156
-
P2.2.5.6 AI4 signal inversion 0 1
-
0 162 0 = Not inverted
1 = Inverted
1
Use the Terminal to Function method (TTF) with these parameters, see 10.626 "Terminal to Function" (TTF) Programming Principle )
2
Remember to place jumpers of block X2 according to the selection (0, 1, or 2). See the User Manual of the product.
Table 97: Digital Inputs (Control Panel: Menu M2 -> G2.2.4)
Index Parameter Min Default ID Description
P2.2.6.1 (1)
Start A signal 0.1 A.1 423
-
P2.2.6.2
(1)
Start B signal 0.1 A.4 424
-
P2.2.6.3
(1)
Control place A/B selection 0.1 A.6 425
-
P2.2.6.4
(1)
External fault (cc) 0.1 0.1 405
-
P2.2.6.5
(1)
External fault (oc) 0.1 0.2 406
-
P2.2.6.6
(1)
Run enable 0.1 0.2 407
-
P2.2.6.7
(1)
Acc/Dec time selection 0.1 0.1 408
-
P2.2.6.8
(1)
Control from I/O terminal 0.1 0.1 409
-
P2.2.6.9 (1)
Control from keypad 0.1 0.1 410
-
P2.2.6.10
(1)
Control from fieldbus 0.1 0.1 411
-
P2.2.6.11
(1)
Reverse 0.1 0.1 412
-
AB296635287482en-000301 / DPD00903 138 | Danfoss A/S © 2023.02
Pump and Fan Control Application
VACON® NX All-in-One
Application Guide