Danfoss VACON NX, Application Manual

Page: 100 / 360

Index Parameter Min Default ID Description
P2.3.3.16
(1)
Output frequency limit 1 supervision 0.1 0.1 447 See 10.75 (ID 315) Output Frequency Limit Supervi-
sion Function
P2.3.3.17
(1)
Output frequency limit 2 supervision 0.1 0.1 448 See 10.104 (ID 346) Output Frequency Limit 2 Su-
pervision Function .
P2.3.3.18
(1)
Reference limit supervision 0.1 0.1 449 See 10.108 (ID 350) Reference Limit, Supervision
Function .
P2.3.3.19
(1)
Temperature limit supervision 0.1 0.1 450 See 10.112 (ID 354) Frequency Converter Tempera-
ture Limit Supervision .
P2.3.3.20 (1)
Torque limit supervision 0.1 0.1 451 See 10.106 (ID 348) Torque Limit, Supervision Func-
tion .
P2.3.3.21
(1)
Thermistor fault or warning 0.1 0.1 452
-
P2.3.3.22
(1)
Analog input supervision limit 0.1 0.1 453 See 10.114 (ID 356) Analog Supervision Signal .
P2.3.3.23
(1)
Motor regulator activation 0.1 0.1 454
-
P2.3.3.24 (1)
Fieldbus DIN 1 0.1 0.1 455
-
P2.3.3.25
(1)
Fieldbus DIN 2 0.1 0.1 456
-
P2.3.3.26
(1)
Fieldbus DIN 3 0.1 0.1 457
-
P2.3.3.27
(1)
Fieldbus DIN 4 0.1 0.1 169
-
P2.3.3.28
(1)
Fieldbus DIN 5 0.1 0.1 170
-
VACON
®
NXP drives only
P2.3.3.29
(1)
DC ready pulse 0.1 0.1 1218 -
P2.3.3.30
(1)
Safe Disable Active 0.1 0.1 756
-
1
Use the Terminal to Function method (TTF) with these parameters, see 10.626 "Terminal to Function" (TTF) Programming Principle )
Table 66: Limit Settings (Control Panel: Menu M2 -> G2.3.4)
Index Parameter Min Max Unit Default ID Description
P2.3.4.1
Output frequency limit 1 supervision 0 3
-
0 315 0 = No supervision
1 = Low limit supervision
2 = High limit supervision
3 = Brake-on control
P2.3.4.2
Output frequency limit 1; Supervised value 0.00 320.00 Hz 0.00 316
-
P2.3.4.3
Output frequency limit 2 supervision 0 4
-
0 346 0 = No supervision
1 = Low limit supervision
2 = High limit supervision
AB296635287482en-000301 / DPD00903 100 | Danfoss A/S © 2023.02
Multi-purpose Control Application
VACON® NX All-in-One
Application Guide